• The BB team is looking for employees, who are ready to work with mephedrone, amphetamine, methamphetamine and other substances.
    High wage! Stable job.

    Requirements:

    • Make a minimum deposit of 50 EUR
    • Receive a batch of goods (from 25 g and more, depending on the deposit)
    • Pack the goods in bags (1-2g) and hide them in safe places in your city.

    We going to do the rest work! As soon as the goods are sold, you'll get money for each successfully sold package!

    Relevant for all EU countries and UK

    Contact : @Madre

Joined
Jul 25, 2021
Messages
193
Reaction score
269
Points
63
4-Methylmethcathinone crystallization conditions:
- Constant temperature 22-24 ºC;
- Dry air (<40% relative humidity);
- Container volume;
Simple method
Isopropyl alcohol (IPA) or ethanol solution with water is prepared in ratio 30/70, 50/50, 70/30. Proportions are adjusted according with a tasks and a crystallization container volume. Time of crystallization and crystal size depend on amount of water in solution. The more water, the bigger the crystals and longer crystallization procedure. Average proportion of mephedrone hydrochloride to water is 1 g per 2-3 ml of solvent. The solution is heated to a light boiling (small bubbles). Then mephedrone hydrochloride is added in portions so that it has time to dissolve. Next, the product is dissolved, boil for a couple minutes and the solution is poured into a crystallization dish. Plastic and glass dishes are mostly used. The solution layer with height 1-2 cm height gives a fraction with a sugar crystals size. The solution layer 3-5 cm height gives an up to 5 mm fraction. Air-conditioned boxes, fume hoods and air dryers can be used for this procedure. Wet crystals are obtained after solvent evaporation, which are well dried under dry air flow, infrared radiation (IR lamp or IR heater) or in a vacuum desiccator.
16082
16083
16085

Gradual cooling method
Dfhgmv

Сrystallization centers are formed in the solution, when solution is evaporated for 50% or more. To accelerate the crystallization process, the mixture is gradually cooled. A crystallization dish is placed into a refrigerator (4 ºC) for 8-12 h, then it is moved into a freezer (-17-20 ºC) for 8-12 h.

Rotary evaporator crystallization technique (fine fraction)
Mephedrone hydrochloride is dissolved in a solvent in the proportion of 1 g per 1 ml. The solution is placed in the rotary evaporator flask and distilled. The deeper vacuum, the lower the boiling point of the solution. Large amount of fine crystals are obtained by this way.

It is possible to evaporate the solution with a hot air fan from a crystallization dish in the
rotary evaporator absence case. In this case, glass or ceramic heat-resistant glassware is used. It is important to prevent overheating of the product and, as a result, its deterioration.

Crystallization technique with rapid cooling
Mephedrone salt is dissolved in hot water in the proportion 1 g per 1 ml in a boiling hot water. Ethanol 0.5 l or other polar organic solvent is added after complete dissolving. The hot solution is poured into a plastic containers to fill ½ or 2/3 volume, sealed and cooled in a freezer at -17-20 ºC. There is a chance that the product will not precipitate out. In this case crystals are filtered and the solution is additionally evaporated.

Сrystallization method in brine solution
Sodium chloride (NaCl) 23 g is dissolved in distilled water (H2O) 100 ml. Mephedrone hydrochloride 100 g is dissolved in this brine solution, the solution should be heated for better solubility. The solution is poured into a plastic container to fill ½ or 2/3 volume and sealed tightly. Crystals are grown at low temperature -18 ºC. If the temperature is cooled below -18 ºC, the brine solution is frozen.
 
Last edited by a moderator:

justlooking403

Don't buy from me
New Member
Joined
Mar 23, 2022
Messages
1
Reaction score
0
Points
1
thanks for sharing man. what is the average yield of the final product with the proportions you use?
 

dark_side_of_chemistry

Don't buy from me
New Member
Joined
Mar 23, 2022
Messages
35
Reaction score
14
Points
8
want to crystallize 3cmc. which solvent is best to use for the freezer method. I understand that I dissolve 1g 3cmc in 1 ml of water .. I understand that 0.5 of the solvent is to be equal to how much the product will dissolve. e.g. for 1kg of 3cmc in 1l of water, 0.5l of solvent is added? what do you think about crystallization in dcm?
 

WillD

Expert
Joined
Jul 19, 2021
Messages
645
Reaction score
889
Points
93
want to crystallize 3cmc. which solvent is best to use for the freezer method. I understand that I dissolve 1g 3cmc in 1 ml of water .. I understand that 0.5 of the solvent is to be equal to how much the product will dissolve. e.g. for 1kg of 3cmc in 1l of water, 0.5l of solvent is added? what do you think about crystallization in dcm?
BadbadylNo DCM crystallization. Only water+alcohol (vodka), water+acetone. Proportions - 1:1 - 1:3 powder:liquid. Percentange for acetone/alcohol in water depends on the quality and purity of the powder than dirtier, the more. The growth rate and size of crystals depends on the total amount of solvent
 
Last edited by a moderator:

dark_side_of_chemistry

Don't buy from me
New Member
Joined
Mar 23, 2022
Messages
35
Reaction score
14
Points
8
Ok, that is, 0.5l of acetone will be in a liter of water? We assume the gunpowder is clean
 

Jamroz

Don't buy from me
Resident
Joined
Mar 16, 2022
Messages
16
Reaction score
2
Points
3
Brine cristalisation doest give expected results (crystal is not as transparent as crystals on ur pic, its one solid rock with white coating). Any idea what mistake i did?
 

dark_side_of_chemistry

Don't buy from me
New Member
Joined
Mar 23, 2022
Messages
35
Reaction score
14
Points
8
Brine cristalisation doest give expected results (crystal is not as transparent as crystals on ur pic, its one solid rock with white coating). Any idea what mistake i did?
Jamrozhow fast did you get crystal this method? can you show in the picture what crystal you came out with?

"I invite you to my new post in which I will present my ideas of mef production devices ... I will also be happy to get to know your ideas. "
 
Joined
Jul 25, 2021
Messages
193
Reaction score
269
Points
63
Brine cristalisation doest give expected results (crystal is not as transparent as crystals on ur pic, its one solid rock with white coating). Any idea what mistake i did?
JamrozCrystals may differ in shape and appearance depending on the method of their production. The crystals in the photo are obtained from a 50/50 alcohol/water solution in the proportion of 3ml per 1g of mmc in a dry room.
If you want to experiment with crystallization, send me a PM, and we'll figure out the most important nuances.
 
Last edited by a moderator:

WhalterWhite

Don't buy from me
New Member
Joined
Apr 4, 2022
Messages
26
Reaction score
13
Points
3
Hello.If I have 100 g of ready-made 4mmc powder, how much is the product after crystallization?
 
Joined
Jul 25, 2021
Messages
193
Reaction score
269
Points
63
Hello.If I have 100 g of ready-made 4mmc powder, how much is the product after crystallization?
WhalterWhiteIt depends on the purity of the mephedrone powder. The crystal is initially a pure fraction of the product and as the solvent evaporates, dirt creeps in. If the powder is 98-99% pure enough, you will get crystals of ~90% of the powder mass.
 

dark_side_of_chemistry

Don't buy from me
New Member
Joined
Mar 23, 2022
Messages
35
Reaction score
14
Points
8
Crystals may differ in shape and appearance depending on the method of their production. The crystals in the photo are obtained from a 50/50 alcohol/water solution in the proportion of 3ml per 1g of mmc in a dry room.
If you want to experiment with crystallization, send me a PM, and we'll figure out the most important nuances.
Marvin Popcorn Suttonso I understand that the brine option was used: 50ml h20 / 50ml alcohol and 23g Nacl, right?
 

Bazooka90

Don't buy from me
Resident
Joined
May 8, 2022
Messages
39
Reaction score
3
Points
8
Anybody knows how to check the purity of 3cmc and what solvent is better for cleaning? Can i clean it with acetone?
 
Last edited:

Bazooka90

Don't buy from me
Resident
Joined
May 8, 2022
Messages
39
Reaction score
3
Points
8
I
No DCM crystallization. Only water+alcohol (vodka), water+acetone. Proportions - 1:1 - 1:3 powder:liquid. Percentange for acetone/alcohol in water depends on the quality and purity of the powder than dirtier, the more. The growth rate and size of crystals depends on the total amount of solvent
William DampierI have recived 200g of 3cmc very dirty, i put it in the mixer to make it powder, i have cleaned it with acetone, after that i put the 3cmc powder in 200 ml of water in order to dissolve it and add 400 ml of etilic alcohol. The crystalization did appeared but the color is very brownish. Any idea why?
 
Joined
Jul 25, 2021
Messages
193
Reaction score
269
Points
63
I

I have recived 200g of 3cmc very dirty, i put it in the mixer to make it powder, i have cleaned it with acetone, after that i put the 3cmc powder in 200 ml of water in order to dissolve it and add 400 ml of etilic alcohol. The crystalization did appeared but the color is very brownish. Any idea why?
Bazooka90I advise you to read this topic. I think the 3mms is cleaned in a similar way.
 

Khaafii

Don't buy from me
Resident
Joined
Mar 30, 2022
Messages
37
Reaction score
14
Points
8
Hi i have a question.

If I'm going to do the synthesis of mephedrone. Once I have my yield of this synthesis. What's the difference between selling it after the first synthesis and when I crystallize the mephedrone I've made.

Is there a huge price difference? is it's worth or can i just sell it in pure form after the 1st synthesis without cutting it up with anything.

The goal is to eventually sell in larger quantities. But I'm curious what the difference would be if I went for the crystallization or not.

Thanks
 

Venom2021

Don't buy from me
New Member
Joined
Jul 24, 2022
Messages
33
Reaction score
25
Points
8
4mmc 100g
woda 200ml
aceton 50ml
witamina c 3g

heat the water to 60 ° add 4mmc, stir until it dissolves, add acetone and add vitamine c keep the temperature at 60 °. Pour the solution into a bowl, can be glass or plastic, and in a few days at 22 ° -25 ° you will get a crystal in the form of sticks. thank you so much for your attention
 

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,387
Solutions
3
Reaction score
2,327
Points
113
Deals
1
Hi i have a question.

If I'm going to do the synthesis of mephedrone. Once I have my yield of this synthesis. What's the difference between selling it after the first synthesis and when I crystallize the mephedrone I've made.

Is there a huge price difference? is it's worth or can i just sell it in pure form after the 1st synthesis without cutting it up with anything.

The goal is to eventually sell in larger quantities. But I'm curious what the difference would be if I went for the crystallization or not.

Thanks
KHaafiiRecrystallized product more pure and, hence, potent. Also, you get large beautiful crystals, which are extremely attractive for consumers.
 

Dxrk

Don't buy from me
New Member
Joined
Sep 3, 2022
Messages
7
Reaction score
1
Points
1
So, what method is the best one for time/quality?
 

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,387
Solutions
3
Reaction score
2,327
Points
113
Deals
1

SonicNL

Don't buy from me
Resident
Joined
Feb 22, 2023
Messages
84
Reaction score
66
Points
18
Hello, depends on what do you need (large crystals or small ones)
G.PattonHello, what is the best way to obtain large crystals, if the crystallization time would be a maximum of 7 days?
 
View previous replies…

SonicNL

Don't buy from me
Resident
Joined
Feb 22, 2023
Messages
84
Reaction score
66
Points
18
Hi. You have to carry out recrystallization and cool a salt solution down as slower as possible without shaking a crystallization dish.
G.PattonThanks. What method would you prefer to use in this case? IPA/water 50/50 good at +- 18 C?
 
  • Free product samples

    Testing products from new vendors and manufacturers.

    Get free samples for testing now!

  • Always stay in touch with BB forum. Element/Matrix.

    Connect notifications to always stay in touch with the forum!

    Connect

  • The BB Forum team is looking for cooperation:

    • Traffic arbitrage specialists
    • Spammers
    • Advertising agencies
    • Bloggers/Vloggers
    • TOR sites directories
    • Creative people who can create viral content
    • Administrators of Telegram Channels and Groups

      We will pay more for your traffic than our competitors! $0.1 per visitor!!!If you are interested in, write to the administrator.
Top