How do you lay LSD correctly?

[Solros]

Hello everyone, i'm a LSD enthusiast and am soon to be trying out laying tabs of LSD myself to decrease costs & increase stock while at the same time being to offer quality & different prints which makes lsd even greater in my opinion. I know about volumetric dosing and all that, but i'm wondering how would I correctly lay the tabs because i've seen different stuff on the internet, one being with drops which I find incredibly ineffective, i've also seen people use high purity ethanol or vodka but won't that leave a taste to the tab? is there any substitutes since we all know the tabs should not have any taste. I am willing to learn and I can afford to try myself and fail, but i'd rather ask my question and get a concrete answer to learn off, maybe some sort of proper guide. Anyone with the proper knowledge, can you write a guide for dosing 100ug properly on let's say a 900 tab sheet which is 7.5x7.5x inches. What material should I be using, should I be using something like ethanol or can I substitute it with some pure form of water? Will ethanol leave of an alcohol taste?

 

[Marvin "Popcorn" Sutton]

Traces of ethanol may remain for some time, depending on what you are going to impregnate. But there is a good chance that the ethanol will evaporate completely.

Vodka may contain flavorings that will leave a taste.

Water is preferable for impregnation because it is tasteless and odorless, but ethanol will also work in some cases.

 

[Grand Poobah]

There are some versions of L that do not break down in water. Do a test with a tiny amount first.
Back in the day there was lavender, it did not break down in water.

 

[Solros]

Traces of ethanol may remain for some time, depending on what you are going to impregnate. But there is a good chance that the ethanol will evaporate completely.

Vodka may contain flavorings that will leave a taste.

Water is preferable for impregnation because it is tasteless and odorless, but ethanol will also work in some cases.

Marvin Popcorn SuttonWhat kind of water would one use since I'd assume it would ruin the LSD if one would use tapwater.

 

[madmoney69]

900 X100uq = 90mg xtal for 900 tabs you need.
use vodka without flavor, dont dip because it will distribute not even forming stronger and weaker tabs on same sheet.
its done with pipettor (pipette but you can adjust volumes per one press) one by one if you want good results and dont have load of xtal to experiment.

 

[WillD]

Anyone with the proper knowledge, can you write a guide for dosing 100ug properly on let's say a 900 tab sheet which is 7.5x7.5x inches. What material should I be using, should I be using something like ethanol or can I substitute it with some pure form of water? Will ethanol leave of an alcohol taste?

SolrosClean or denatured alcohol. When it evaporates, there will be no excess taste. Now, the distribution of dosages in large-scale production: In the container with a known number of the selected solvent, we put the whole blotter. We take the blotter, shake the drops into the container, and measure how much solvent remains. All operations are carried out in a very cold room to avoid excess evaporation. Measuring, we got the difference - the amount of solvent that was absorbed by the blotter. Next, we prepare the solution of the desired concentration - the number of doses (how many squares we have) to the resulting amount of solvent. So, you can take a large container and "charge" thousands of dosages quickly. Need more details, write.

 

[chinacat]

Clean vodka will do the trick. As per Williams advice, first find out how much solvent your tabs absorb, then prepare solution. Mix the xtal with dh20 in the container you receive it in. I like to use a syringe and apply the solution over each row of blotter vertical then horizontal...the blotter paper absorbs the solution evenly.

 

[DeepSpace9]

Vodka, and a syringe.. 10ml of vodka per .1 gram of needlepoint, will be perfect for a page. Let it dissolve then diagonally run the syringe from one corner to the other. (Bottom to top)

 

[BLVST]

I have heard acetone distributes evenly and evaporates cleanly with 14lb watercolor paper.

 

[cubesquare]

I am very interested in seeing this discussion. Back in the 80's, I was lead to believe that LSD was mixed with a strychnine solution to help it bind to the paper. How clueless and gullible I was
(That never stopped me enjoying it...)

 

[TotalSynthesis]

I am very interested in seeing this discussion. Back in the 80's, I was lead to believe that LSD was mixed with a strychnine solution to help it bind to the paper. How clueless and gullible I was
(That never stopped me enjoying it...)

cubesquaresounds like DEA propaganda...

 

[cubesquare]

sounds like DEA propaganda...

TotalSynthesisI am currently reading a book called "Acid Test: How a Daring Group of Psychonauts Rediscovered the Power of LSD, MDMA, and Other Psychedelic Drugs to Heal Addiction, Depression, Anxiety, and Trauma" by Tom Schroder.
He talks about Rick Doblin, Michael Mithoefer and a bunch of others have been fighting DEA scheduling to allow for the use of these power psychedlics in therapy.
He discussed a lot of the DEA/Regan era anti-LSD propoganda that was slung about.
While strychnine wasn't mentioned, many of the other things that were were things that I had heard through the grapevine as potential effects of my favourite pastime.
I lived in South Africa, so that shitty propganda made itself worldwide.
Holes in the brain, just one hit more could end your brain, people peeling off their skin becasue they thoguht they were oranges, people leaping from balconies, convinced they could fly. I mean, all of that shit, scared the pants off of me before my first trip (a purple ohm back in 1988). After that I was fine, I knew what acid did to me.

 

[TheShocker]

sounds like DEA propaganda...

TotalSynthesisi was under the same inmpression..did allot of acid in the 90sn and always had twitches in my spine for months after a binge..a doctor once told me that it was from chemicals not being cleaned properly out of lsd i had done..hmm

 

[Cypherdelic]

Was also curious about this, yes you could do it with a pipette individually, but now I realise the blotter paper distributes the liquid quite evenly anyway.

 

[Symbiosis]

i was under the same inmpression..did allot of acid in the 90sn and always had twitches in my spine for months after a binge..a doctor once told me that it was from chemicals not being cleaned properly out of lsd i had done..hmm

TheShockerHow much were you consuming? Never had that issue and ive had a fair amount of trips but in a reasonable way spaced atleast a week apart generally. Wouldnt be surprised if poor chemists who didnt want to purify and reduce yield / profit wouldnt do cleaning washes to recrystallize

 

[cubesquare]

How much were you consuming? Never had that issue and ive had a fair amount of trips but in a reasonable way spaced atleast a week apart generally. Wouldnt be surprised if poor chemists who didnt want to purify and reduce yield / profit wouldnt do cleaning washes to recrystallize

SymbiosisI think that those chemists usually went out of business quite quickly - their trips weren't as good as others so people chose to buy different brands
I always believed the strychnine one because of how my mouth felt on acid, but knowing what I know today, that was likely psychosomatic as I went into each trip with that as "knowledge" so my mindset was affected...
I also heard lots of people moaning about skeletal issues - I just attributed any pains I had to excessive laughter and dancing...