• The BB team is looking for employees, who are ready to work with mephedrone, amphetamine, methamphetamine and other substances.
    High wage! Stable job.

    Requirements:

    • Make a minimum deposit of 50 EUR
    • Receive a batch of goods (from 25 g and more, depending on the deposit)
    • Pack the goods in bags (1-2g) and hide them in safe places in your city.

    We going to do the rest work! As soon as the goods are sold, you'll get money for each successfully sold package!

    Relevant for all EU countries and UK

    Contact : @Madre

MDMA from blackpeper seeds

Kai

Don't buy from me
Resident
Joined
Nov 7, 2021
Messages
25
Reaction score
21
Points
3
Once I heard you can use near anything for base MDMA. What kinda methods I need to follow to make this crazy and completely useless project?
 
Last edited by a moderator:

WillD

Expert
Joined
Jul 19, 2021
Messages
645
Reaction score
889
Points
93
If you decide to go this route, I advise you to buy standardized pepper extract, piperine 95% pure. This can be sold through chinese suppliers as raw materials for bioactive additives. So we avoid one stage of extraction of the primary substance. Next, we make the reaction of oxidative cleavage with the help of relatively available reagents:

Step 1:
1. Piperine (10g) was dissolved in acetonitrile (300ml), H2O (300ml) and dichloromethane (150ml) and sodium bicarbonate (15g), ruthenium chloride (1.5g) and
Oxone (43g) were added
2. The mixture was stirred for 24h before a further amount of sodium bicarbonate (15g), ruthenium chloride (1.5g) and Oxone (43g) were added
3. The solution was stirred for another 24h before being poured into H2O (300ml) and extracted with dichloromethane (400ml)
4. The combined organic extracts were washed with a saturated solution of sodium thiosulfate (200ml), dried (MgSO4), and evaporated, If necessary, can be cleaned by vacuum distillation, yield 1,8g piperonal

Oxone - patented name for disinfection of pools, and sold in the appropriate stores. It can be released in different forms and packaging, in the form of tablets for dissolution, but for our purposes it is better to look for powder or granulated. Next, we need nitroethane, in some cases the reagent is sold as a additive for automotive fuel, not to be confused with nitromethane (It can also be sold as a additive to fuel).

Step 2:
1. To a solution of piperonal (10g) in acetic acid (50ml) was added nitroethane (10ml) followed by cyclohexylamine (7ml) and the mixture was held at 100*C for 6h
2. The mixture was then diluted with H2O (10ml) and left at 4*C overnight before being filtered to yield 3,4-methylenedioxyphenyl-2-nitropropene 7,5 g as yellow crystals

Next we can have several routes. We can reduce nitropropene in MDA, but in the subject of this topic we are looking for another substance. Although for MDA is possible methylation of the amino group to MDMA. In this case, the primary reaction may be amalgam.

Another way is to obtain a ketone from nitropropene:
1. To a refluxing suspension of iron dust (35g) in acetic acid (150ml) was added dropwise a solution of 3,4-methylenedioxyphenyl-2-nitropropene (10g) in acetic acid (100ml)
2. The resulting mixture was stirred at reflux for 2h before being diluted with H2O (500ml) and extracted with dichloromethane (300ml)
3. DCM extract dried (MgSO4) and concentrated under reduced pressure to yield 3,4-methylenedioxyphenyl-2-propanone (9g) as a brown oil

From propanone and already with nitromethane (or ready methylamine), we can go to MDMA via amalgam or choose other routes.
 

HIT MONKEY

Don't buy from me
Resident
Joined
Apr 28, 2023
Messages
37
Reaction score
6
Points
8
If you decide to go this route, I advise you to buy standardized pepper extract, piperine 95% pure. This can be sold through chinese suppliers as raw materials for bioactive additives. So we avoid one stage of extraction of the primary substance. Next, we make the reaction of oxidative cleavage with the help of relatively available reagents:

Step 1:
1. Piperine (10g) was dissolved in acetonitrile (300ml), H2O (300ml) and dichloromethane (150ml) and sodium bicarbonate (15g), ruthenium chloride (1.5g) and
Oxone (43g) were added
2. The mixture was stirred for 24h before a further amount of sodium bicarbonate (15g), ruthenium chloride (1.5g) and Oxone (43g) were added
3. The solution was stirred for another 24h before being poured into H2O (300ml) and extracted with dichloromethane (400ml)
4. The combined organic extracts were washed with a saturated solution of sodium thiosulfate (200ml), dried (MgSO4), and evaporated, If necessary, can be cleaned by vacuum distillation, yield 1,8g piperonal

Oxone - patented name for disinfection of pools, and sold in the appropriate stores. It can be released in different forms and packaging, in the form of tablets for dissolution, but for our purposes it is better to look for powder or granulated. Next, we need nitroethane, in some cases the reagent is sold as a additive for automotive fuel, not to be confused with nitromethane (It can also be sold as a additive to fuel).

Step 2:
1. To a solution of piperonal (10g) in acetic acid (50ml) was added nitroethane (10ml) followed by cyclohexylamine (7ml) and the mixture was held at 100*C for 6h
2. The mixture was then diluted with H2O (10ml) and left at 4*C overnight before being filtered to yield 3,4-methylenedioxyphenyl-2-nitropropene 7,5 g as yellow crystals

Next we can have several routes. We can reduce nitropropene in MDA, but in the subject of this topic we are looking for another substance. Although for MDA is possible methylation of the amino group to MDMA. In this case, the primary reaction may be amalgam.

Another way is to obtain a ketone from nitropropene:
1. To a refluxing suspension of iron dust (35g) in acetic acid (150ml) was added dropwise a solution of 3,4-methylenedioxyphenyl-2-nitropropene (10g) in acetic acid (100ml)
2. The resulting mixture was stirred at reflux for 2h before being diluted with H2O (500ml) and extracted with dichloromethane (300ml)
3. DCM extract dried (MgSO4) and concentrated under reduced pressure to yield 3,4-methylenedioxyphenyl-2-propanone (9g) as a brown oil

From propanone and already with nitromethane (or ready methylamine), we can go to MDMA via amalgam or choose other routes.
William DampierI have a question on this synthesis. Can I use other substances instead of Nitroethane?
 

Kai

Don't buy from me
Resident
Joined
Nov 7, 2021
Messages
25
Reaction score
21
Points
3
If you decide to go this route, I advise you to buy standardized pepper extract, piperine 95% pure. This can be sold through chinese suppliers as raw materials for bioactive additives. So we avoid one stage of extraction of the primary substance. Next, we make the reaction of oxidative cleavage with the help of relatively available reagents:

Step 1:
1. Piperine (10g) was dissolved in acetonitrile (300ml), H2O (300ml) and dichloromethane (150ml) and sodium bicarbonate (15g), ruthenium chloride (1.5g) and
Oxone (43g) were added
2. The mixture was stirred for 24h before a further amount of sodium bicarbonate (15g), ruthenium chloride (1.5g) and Oxone (43g) were added
3. The solution was stirred for another 24h before being poured into H2O (300ml) and extracted with dichloromethane (400ml)
4. The combined organic extracts were washed with a saturated solution of sodium thiosulfate (200ml), dried (MgSO4), and evaporated, If necessary, can be cleaned by vacuum distillation, yield 1,8g piperonal

Oxone - patented name for disinfection of pools, and sold in the appropriate stores. It can be released in different forms and packaging, in the form of tablets for dissolution, but for our purposes it is better to look for powder or granulated. Next, we need nitroethane, in some cases the reagent is sold as a additive for automotive fuel, not to be confused with nitromethane (It can also be sold as a additive to fuel).

Step 2:
1. To a solution of piperonal (10g) in acetic acid (50ml) was added nitroethane (10ml) followed by cyclohexylamine (7ml) and the mixture was held at 100*C for 6h
2. The mixture was then diluted with H2O (10ml) and left at 4*C overnight before being filtered to yield 3,4-methylenedioxyphenyl-2-nitropropene 7,5 g as yellow crystals

Next we can have several routes. We can reduce nitropropene in MDA, but in the subject of this topic we are looking for another substance. Although for MDA is possible methylation of the amino group to MDMA. In this case, the primary reaction may be amalgam.

Another way is to obtain a ketone from nitropropene:
1. To a refluxing suspension of iron dust (35g) in acetic acid (150ml) was added dropwise a solution of 3,4-methylenedioxyphenyl-2-nitropropene (10g) in acetic acid (100ml)
2. The resulting mixture was stirred at reflux for 2h before being diluted with H2O (500ml) and extracted with dichloromethane (300ml)
3. DCM extract dried (MgSO4) and concentrated under reduced pressure to yield 3,4-methylenedioxyphenyl-2-propanone (9g) as a brown oil

From propanone and already with nitromethane (or ready methylamine), we can go to MDMA via amalgam or choose other routes.
William Dampierthanks a lot for your detailed explanation i am started properly learning chemistry this year in online collage and your step by step explanation was really helping me to understand with my smooth brain(y)
 

Hans-Dietrich

Don't buy from me
New Member
Joined
Dec 4, 2021
Messages
47
Reaction score
40
Points
18
Once I heard you can use near anything for base MDMA. What kinda methods I need to follow to make this crazy and completely useless project?
KaiThis is fucked fuck and not an project. You need to work about a kilogram of black pepper to get 5 g of the precursor. It is true fucked fuck.
 

MadHatter

Don't buy from me
Resident
Joined
Dec 4, 2021
Messages
442
Solutions
1
Reaction score
381
Points
63
If you WOULD like to go the extra mile and do the extraction, for safety reasons or whatever, NileRed actually made a video on it, complete with the innocent school boy aura which he lends to all his "making a precursor for drug production masked as making a precursor for hair dye"-videos. And he uses 23 g of black pepper to get 1 g of recrystallized piperine. With a Soxhlet extractor. Enjoy:
 

Sneaky.Base

Don't buy from me
Resident
Joined
Nov 17, 2022
Messages
31
Reaction score
7
Points
8
Hi William, can you give us som
If you decide to go this route, I advise you to buy standardized pepper extract, piperine 95% pure. This can be sold through chinese suppliers as raw materials for bioactive additives. So we avoid one stage of extraction of the primary substance. Next, we make the reaction of oxidative cleavage with the help of relatively available reagents:

Step 1:
1. Piperine (10g) was dissolved in acetonitrile (300ml), H2O (300ml) and dichloromethane (150ml) and sodium bicarbonate (15g), ruthenium chloride (1.5g) and
Oxone (43g) were added
2. The mixture was stirred for 24h before a further amount of sodium bicarbonate (15g), ruthenium chloride (1.5g) and Oxone (43g) were added
3. The solution was stirred for another 24h before being poured into H2O (300ml) and extracted with dichloromethane (400ml)
4. The combined organic extracts were washed with a saturated solution of sodium thiosulfate (200ml), dried (MgSO4), and evaporated, If necessary, can be cleaned by vacuum distillation, yield 1,8g piperonal

Oxone - patented name for disinfection of pools, and sold in the appropriate stores. It can be released in different forms and packaging, in the form of tablets for dissolution, but for our purposes it is better to look for powder or granulated. Next, we need nitroethane, in some cases the reagent is sold as a additive for automotive fuel, not to be confused with nitromethane (It can also be sold as a additive to fuel).

Step 2:
1. To a solution of piperonal (10g) in acetic acid (50ml) was added nitroethane (10ml) followed by cyclohexylamine (7ml) and the mixture was held at 100*C for 6h
2. The mixture was then diluted with H2O (10ml) and left at 4*C overnight before being filtered to yield 3,4-methylenedioxyphenyl-2-nitropropene 7,5 g as yellow crystals

Next we can have several routes. We can reduce nitropropene in MDA, but in the subject of this topic we are looking for another substance. Although for MDA is possible methylation of the amino group to MDMA. In this case, the primary reaction may be amalgam.

Another way is to obtain a ketone from nitropropene:
1. To a refluxing suspension of iron dust (35g) in acetic acid (150ml) was added dropwise a solution of 3,4-methylenedioxyphenyl-2-nitropropene (10g) in acetic acid (100ml)
2. The resulting mixture was stirred at reflux for 2h before being diluted with H2O (500ml) and extracted with dichloromethane (300ml)
3. DCM extract dried (MgSO4) and concentrated under reduced pressure to yield 3,4-methylenedioxyphenyl-2-propanone (9g) as a brown oil

From propanone and already with nitromethane (or ready methylamine), we can go to MDMA via amalgam or choose other routes.
William DampierHi William, looks perfect, do you have any references, if not, did you done this methode, does it work?
 
  • Free product samples

    Testing products from new vendors and manufacturers.

    Get free samples for testing now!

  • Always stay in touch with BB forum. Element/Matrix.

    Connect notifications to always stay in touch with the forum!

    Connect

  • The BB Forum team is looking for cooperation:

    • Traffic arbitrage specialists
    • Spammers
    • Advertising agencies
    • Bloggers/Vloggers
    • TOR sites directories
    • Creative people who can create viral content
    • Administrators of Telegram Channels and Groups

      We will pay more for your traffic than our competitors! $0.1 per visitor!!!If you are interested in, write to the administrator.
Top