Question Where to buy technical sulfuric acid?

Mr.Magic

Don't buy from me
Resident
Joined
Nov 12, 2022
Messages
11
Reaction score
3
Points
3
Hi together,

the last time I have bought sulfuric acid was about 2 years ago, where you could buy it almost everywhere without special permissions. It was shortly before it was classified as a hazardous substance in Europe.
Most online chemical distributors require an end-use statement.

So where can I buy amounts from 1-5l sulfuric acid with <95% purity??
Does someone has a clearnet/darknet market, where sulfuric acid and other chemical goods are offered?

Mr.Magic
 

Never to sleep

Don't buy from me
Resident
Joined
Dec 31, 2022
Messages
127
Reaction score
162
Points
43
95% purity sulfuric acid is not technical grade. It's not "most" distributors that require an end user statement it is all of them. You just won't be able to buy this unless you buy it as a business and declare a legitimate use for it.

Some drain cleaners contain low-grade sulfuric acid which you can extract and concentrate to your desired concentration. Do note however that boiling concentrated sulfuric acid is no joke since you need to do this in temperatures over 300 °C.

As for a marketplace you can use this forum to buy goods. If you really need it you can direct message me and I could send you some.
 

Unknown1505

Don't buy from me
New Member
Language
🇩🇪
Joined
Mar 30, 2025
Messages
4
Reaction score
0
Points
1
hey..ist das noch aktuell? könntest du mich mal anschreiben??
 

amieri

Don't buy from me
Resident
Language
🇺🇸
Joined
Jun 2, 2023
Messages
64
Reaction score
38
Points
18
Distillation of drain cleaner is necessary "hard" and it's a great opportunity to get serious about your procedure.you was to be prepared for absolutely anything.
Ideally outside "lots of white smoke looking gas that does not condense I believe sulphuric oxide "set up a folding table then use some Rubbermaid totes as catch basins just in case and put one stand in a tote and one right next to the basin's' on the outside with a metal clamp holding a two next round bottom with a bunch of smashed glass in it ." it's going to bump very hard when it gets going "a good 6-8 inches of the table with a propane camp grill or similar on a scissor jack so your able to adjust the heat by raising or lowering the the source of flame.
Off your round bottom attach a column then arm ,to your condenser to you vac adapter to your reserver flask.all joint wrap in Teflon tap and metal clamps making sure all clamps hold the glass are tight on both the stand and the glass.the bumping is serious and could easily loose a clamp.now get dressed with two layers covering every single inch of your body from your head to toes.and ideally a acid resistant apron and matching gloves.you can also find chem resistant jump suits at army Navy store that are thick and lined with carbon and face shield "something like a welders helmet". now empty a 4lb box of baking soda into a five gallon bucket and fill 2/3 way up with water this is in case of emergency have a cup or two filled with the base water ready to go next to it .now fill your two neck through the open neck half way with the drain cleaner plug/clamp the neck and light the burner and adjust the jack so the tip of the flames 3-5 inch below the bottom of the flask. Set up a seat a good distance away making sure your up wind of the set up and hopefully sit board watching your distillation for the next few hours.you also don't want any cooling to the condenser the temp differential will crack it which fn sucks.
When you're done you can use the base water and the totes to rinse/neutralize your contaminated glass.
It may seem like over kill but this sh*ts no joke as you see in those pictures.and honestly every action in this hobby should be taken just as serious. Complacment breeds disaster and sadly people tend to skip over safety details in forums way to often.
Good luck and don't be scared be cautious
 

dnBQByvHb8Zkawbjpx

Don't buy from me
Resident
Language
🇨🇿
Joined
May 6, 2024
Messages
214
Reaction score
153
Points
43
In the EU one can buy sulfuric acid up to 15 % concentration with no restrictions. Anything above requires you to have a registered business with a legitimate use case for it, and to fill out the declaration of use of explosives precursors. Or purchase through the dark web.

Being in the EU and not having a business to front my purchase I recently got 40 liters of 14 % sulfuric acid. I was able to reach 80 % concentration by simply boiling off the excess water in a 2 liter beaker on a hot plate. It took me about 5 days of constant boiling/cool down/siphon/refill/repeat and now I have 5 liters of 80 % acid waiting for the final processing step. Today I sourced all missing tools and soon I'll go forward with the distillation into 96 % purity. In the end I expect to get 4 liters of 96 % sulfuric acid obtained through distillation at 337 °C.
 

buffalophill

Don't buy from me
Resident
Language
🇬🇧
Joined
Jan 28, 2024
Messages
19
Reaction score
10
Points
3
Yes for those in the UK with out a business there is hope. You can steadily make sulphuric acid with electrolysis with a h type cell or some sort of membrane to separate the cells.

I managed to make a cup full of concentrated sulphuric acid in a day which can later be boiled down, this was using clay pots and a titanium substrate platinum coated anode. However after a week of production it was melted away. But there us hope... For those who dare wins.

There is a anode called boron doped diamond which is capable of thriving in acidic conditions they are however quite expensive for the moment. But as water filtration plants use them and push the cost down we can get larger and cheaper anodes from China. Sulphuric acid will be obtainable again in the home setting.

A small 20x20 mm square of the substance could cost a minimum of 500 + depending on where you get it.

But even at that size you could make a flow pump type cell so the cell is quite small but pumped from a separate container.


Also search for h type cells on Ali express.
All you need then is the boron doped diamond anode and just tune up s test bench attached to a 5 liter container. Automate the conditions required. Turn it on and 7 days later you got 5 liters of sulphuric acid with just a distillation to finish.

If I had the resources I would build and sell these electrolysis "acid reactors" but we are all here because we are all poor and use drugs to escape reality.

Enjoy...
 
Top