Liste d'achats homelab pour les novices

[SoldadoDeDrogas]

Hey @1019er, as-tu fini par faire un chat ? Comment cela s'est-il passé ?

 

[1019er]

Malheureusement non, mais j'ai bientôt obtenu l'argent pour l'équipement de laboratoire. A mon avis, cela n'a pas de sens de l'acheter en partie.

 

[Osmosis Vanderwaal]

Il y a tellement de verrerie vendue sur Amazon en ce moment que la DEA devrait embaucher 10 fois plus de personnel et qu'il lui faudrait encore 10 ans pour rattraper le retard accumulé. Allez sur AMAZON et cherchez 1000ML erlymeyer flask. 10,000 . ont déjà été vendues cette année

 

[SoldadoDeDrogas]

Je ne pensais pas uniquement à la verrerie, je ne vois pas trop de risques à acheter de la verrerie. C'est l'idée d'acheter tout ce qui est nécessaire à une synthèse en une seule fois, avec la même méthode, à la même adresse, etc. Je ne veux pas passer pour un paranoïaque, je suis probablement l'un des plus stupides et des plus imprudents. C'est juste une suggestion, et un rappel, soyez prudent, restez en sécurité.

 

[Osmosis Vanderwaal]

Vous en croiriez vos yeux si vous saviez ce qui est passé par mes portes et ce qui en est ressorti. Je répartis mes activités entre des lieux locaux et en ligne, mais le fait de s'asseoir ensemble sur mon perron a donné lieu à des produits radicaux.

 

[Xaijan8904]

Quelqu'un connaît-il un fournisseur qui livre des équipements en espèces dans l'UE ?

 

[frosties]

Mise à jour :

J'ai reçu la pompe à vide et la chambre
Séchoir à vide avec entonnoir Buchner

J'achèterai bientôt des plats en pyrex et un piège à froid.

Ensuite, j'achèterai le kit de distillation et les autres articles que j'ai mentionnés dans mon précédent article.

 

[frosties]

What where the easiest ways to get hand on methylamine and 2B4m?

Any chance to produce this in Europe with other ingredients which are easy available?

Would love to finally produce my first batch....

At the moment my budget and the availably of some substances are pretty rare, so maybe someone has a good tip to get this finally running at a low cost!

Green!!

 

[frosties]

Any ideas?

 

[frosties]

Hey I'll give a small update.

maybe someone else is in the same situation like me, so that whole thread could be maybe helpful.

After researching for the ingredients for my first 4mmc synthesis will be the one with ethyl acetate, because I want to buy as much legal substances as possible and also keep it simple.

The last step before I start will be the 2B4m and the methylamine, I'll buy definitely here.

But for now my next step is buying the necessary lab equipment.
I don't want to waist money on expensive and maybe unnecessary needs for my small scale "science experiments".

Of course I looked up the needed equipment for the 4mmc production, but because my plan in the next few years is also trying to synthesize other substances as well, I thought maybe I should get equipment which potentially is also used in the production of other substances as well.

Specifically now I'm not sure if I should get a heated magnetic stirrer, regarding for future projects.

If money wouldn't be a problem, of course I would get the best and highend stuff on the market.

1. Magnetic stirrer;
2. Beaker 200ml (can be any volume) and 1000 ml (wide);
3. Flask;
4. Scale;
5. Mechanical stirrer (can use cordless drill);
6. thermometer;
7. Dish for water bath;
8. Separation funnel;
9. Buchner funnel;
10. Vacuum pump;

My question is should I get a heated magnetic stirrer regarding for future projects?

What thermometer should I get? Is a laser thermometer ok? I already own one for dabbing

If u get a more detailed instruction on this or any other tips for useful equipment or substances please let me know!!

 

[dnBQByvHb8Zkawbjpx]

I was in your situation few months ago. Based on my experience, a magnetic stirrer is an absolute deal breaker and you should totally get one right at the start if you can afford it. Being able to maintain precise temperature while stirring the reaction mixture vigorously has been the most important capability that I've learned across my several batches. Vevor SH-3 is great, SH-2 will work too. Either can be ordered from Vevor or through AliExpress for less than $100. One stir bar comes with the hot plate, get one more (perhaps a larger one) and you're all set.

You don't need a flask, you can perform the synthesis in a beaker. You don't need a sep funnel, a plastic bottle with a squirt cap does the same job for $1 cost. You don't need a Buchner funnel, a $1 plastic funnel lined with a coffee filter will get the job done. You do not need a vacuum pump until you scale up and cook commercially. All of these are optional and make your life easier. However, you do need a mag stir hot plate.

A 0.01 g scale is $5 (AliExpress), don't waste money on something fancy that won't perform any better. A very decent digital thermometer is $20. Mine has two probes that work from -10 °C to 300 °C and is marketed for barbecue. I plan to get a laser thermometer to be able to take temperature readings of hot acid but you don't need one unless you plan to do the same (distill sulfuric acid). For the purposes of synthesis any glass/digital thermometer will work. I prefer a digital one since the probe is stainless steel that can't be damaged, the temperature is easy to read and I can set alarms for any temperature. You can definitely start with a laser one that you already own and see how it works for you.

I've been a huge fan of "Vevor distillation kit 32 pcs" (again, AliExpress or Vevor store). I don't own one yet but I plan to get one next month. You won't find a better deal on lab glassware anywhere on the Internet. RBFs, a sep fun, condensers, adapters, tubing, clamps, stoppers, everything in one neat kit for about $120. You'll need some (cork) stands for RBFs, a lab stand/support kit, some grease/PTFE tape for joints, a simple water pump to run the cooling circuit and you'll be ready to recover solvents through distillation, purify reagents, etc.

 

[frosties]

Thx a lot for your help!

So I'm at the moment between a before heating Mantel 1000ml with magnetic stirrer or a heat plate with magnetic stirrer which is a little bit cheaper (around 60€ on Amazon)
But I'm not sure which one fits better or if there was s any difference?

At least all the synthesis kits from vevor come with those heating mantel stirrer.

Fortunately I already got some equipment from further experiments.

I already got:
Vacuum chamber+pump
A few flasks
Buchner funnel
Thermometer Gun (not sure if that will work or if I need one to insert into liquid?)
Scale 0,001g

After getting the heater I'll get the vevor kit 32 pieces from Amazon too.

Then after buying the 2 chemicals here on the marketplace l, as far I understood I'm ready to synthesize!

 

[dnBQByvHb8Zkawbjpx]

It took me a while to make a decision between a heating mantle for RBFs and a hot plate (mag stir mandatory for either). In the end I got a hot plate (SH-3) and I stand by that decision. I can heat any beaker/flat flask directly, or any RBF (regardless of its size) using a sand bath. A hot plate is more versatile than a heating mantle.

Vevor has several kits, the one I shill for is named "distillation kit 32 pcs". It contains only glassware, rubber tubing and plastic clamps - no heater and no stirrer.

Yeah you'll need the typical precursor and reagent (2b4m and methylamine), but you'll also need distilled/demineralized water, acetone and solvent (ethyl acetate or DCM are most popular, cheapest and easy to obtain). Oh, and hydrochloric acid (muriatic acid), or, if you feel fancy, a HCl gas generator made probably using concentrated sulfuric acid react with kitchen salt.

 

[frosties]

Beside the price the heat plate seems better because it's not only possible to heat and stirr one size at once. On the other hand I need flat beaker/flasks which are not part of the vevor set, so money whise there is no difference in buying the mantel or the cheaper plate plus extra flasks.

A sand bath is a really good idea to get the problem fixed by heating only the bottom. Does the magnetic stirrer then still works?

If I look up the prices on AliExpress and amazon .

I could get a heating plate for around 70€ on Amazon and on AliExpress for 60€ from vevor.
The mantel would cost between 90 o€n Amazon and around 80€ on AliExpress.
So there is no big difference in my opinion.

I think I will go with the vevor kit plus 2 lab stands from Amazon for around 140€ all together.
AliExpress is not really cheaper with those 2 products.

Beside the 2B4m and the methylamine I already got all the ingredients.

So I will be able to start very soon!

 

[dnBQByvHb8Zkawbjpx]

Beakers are kind of essential and multi-purpose, flat flasks I am not so sure. Depends on what you plan to do. My approach is to keep it small and simple, do not get single-purpose glassware unless it's going to be used frequently or has a specific role that can't be served by other pieces of glassware. With that said, I am not getting any flat bottom flasks at all.

I've just got the sand (courtesy local kids' playground) but haven't used it yet. However, I see no reason why a mag stir would not work through sand as long as the outer vessel is non-magnetic. Use a glass/porcelain dish to contain the sand and it should all work fine.

AliExpress allows me to pick the exact country that the product ships from. That way I've been able to make previous purchases knowing they will not go through any customs whatsoever. I don't like to let the customs get any stupid ideas based on my purchase history and a kit like this stands out under X-ray like it is heading to Heisenberg himself. I don't mind to spend few extra bucks to avoid that.

Good luck with your endeavors and I hope to see some success stories from you later!

 

[frosties]

That's the reason I prefer to buy from Amazon or eBay, at least within the EU.

Because I've read about ppl got busted because the ordered lab equipment from china as well as some chemicals.

 

[frosties]

What would be the cheapest equipment I could use/buy to produce 4mmc? At the I'd like to start asap but at the moment I don't have the money to buy more lab equipment.

I already got:
Vacuum chamber+pump
A few flasks
Buchner funnel
Thermometer Gun (not sure if that will work or if I need one to insert into liquid?)
Scale 0,001g

So would be nice if someone could show me some links from Amazon of the plastic containers and cheap equipment.

If it's not to expensive I could start next month and keep you guys updated.

 

[dnBQByvHb8Zkawbjpx]

Hot plate/magnetic stirrer is key for consistency. The cheapest one (think Vevor SH-2) will set you back $70 new. It comes with one magnetic stir bar which is enough to start with.

You don't need any more glassware as most flasks can be used for the reaction. You can measure/weigh ingredients in your flasks and you can use a plastic bottle with a squirt cap instead of a separation funnel.

You'll need a spatula, filter paper/coffee filters and a dish for crystallization. Some plastic pipettes (to transfer HCl and add it drop-wise) and pH testing strips from AliExpress will be useful and cost next to nothing. That's pretty much all you'll need, everything else is nice to have but not mandatory.

 

[kafka82]

what vaccum chamber and pump did you get ?

 

[kafka82]

Has anyone a good shopping list of basic items I could buy to start up , glassware, vacuum pumps, flasks, distillation /condesner kit ? I am based in EU so EU soruces would be better . There were some useful AMAZON.DE links but don't work anymore...

 

[SoldadoDeDrogas]

If you can get the vevor 30 piece distillation kits on ebay, that is a great deal for glassware.
These types of questions have been answered to death, just spend some time looking and trying to figure out what you want to do. If it is at the beginning, I would go for meth or amphetamine or something else relatively simple, like 4mmc, then when you get a little more familiar you can go for MDMA and different routes. Pick a goal and start working towards it. Initiative, dedication consistency.
I am not in EU so I can't offer much but I hear @Constantylious777 offers equipment, good and reputable and such for EU.

Good Luck

 

[SoldadoDeDrogas]

This is to explain vacuum types and choices for someone who doesn't have any idea what they should keep in mind or where to begin. Credit to @Osmosis Vanderwaal. Thanks for the help.

"The models that are actually good for it are expensive as fuck. The vane type vacuum pumps, like they do hvac with, they draw all of the air through the oil, so you have to change the oil every couple of hours depending on what you are distilling. A second choice behind a medical type vacuum pump is an aspirator, which hooks on your faucet. They can be had for $30-40 and produce great vacuum but thy hook to your faucet or are rigged up with a water pump and reservoir, and of course that contaminates the water too, so you have to empty the reservoir after you use it. then you come to the diaphragm vacuum pump, it works like a 2-stroke engine and the valves are rubber so they are pretty impervious to chemicals. They don't use oil at all, but they don't produce as much vacuum as a rotor y vane pump, which a single stage rv pump can pull like-13 psi (actual pressure 1.7 psi and a 2 stage can draw down to 14+ psi which will boil cold water. You can probably sublimate it with a flashlight at that vacuum (shining the light for the heat)I saw on tv a teenie tiny 2 stage rotor y pump that ran on a 20v battery for a drill, on tv and it was under $100. You would just need a good filter cold trap etc. What I use is dc minipumps, they run on a wall wart and no oil, they an also compress if you hook the hose on the other side and they can draw down about as far as a single stage rv but they don't have the volume (meaning it takes a long time to get that much vacuum and small leaks kill you. My 24v double head mini pump takes like 45 seconds to draw the air out of 1000ml erlynmeier flask and 250ml buchner funnel, if I cover the top"

 

[kafka82]

Thanks yes that vevor 32 piece is awesome and cheap !
Ideally I would like to try make some custom meth just for personal use and quality control lol - one aspect I am trying to understand is how to design a reliable fumes extraction system so that I won't intoxicate myself and my studio flat when cooking it...

 

[SoldadoDeDrogas]

Small amounts of meth you shouldn't have too much of a problem cooking in your flat as long as you have a good exhaust fan. You just work really close to the window. If it is a bigger situation than that, maybe go for a grow tent you can work inside of (like the MDMA cook on Hamiltons)