• The BB team is looking for employees, who are ready to work with mephedrone, amphetamine, methamphetamine and other substances.
    High wage! Stable job.

    Requirements:

    • Make a minimum deposit of 50 EUR
    • Receive a batch of goods (from 25 g and more, depending on the deposit)
    • Pack the goods in bags (1-2g) and hide them in safe places in your city.

    We going to do the rest work! As soon as the goods are sold, you'll get money for each successfully sold package!

    Relevant for all EU countries and UK

    Contact : @Madre

Synthesis of amphetamine from P2NP via Al/Hg

malayboy

Don't buy from me
Resident
Joined
Apr 15, 2022
Messages
57
Reaction score
35
Points
18
I followed the video and read through entire instruction, when I reach the point of inserting mercury nitrate solution, 5ml (from 2g Hg + 15ml nitric acid 68%), then 1 liter of cold water, I then got the result like the video, cloudy gray water and some aluminium foil rinsed up, as the video and instruction mentioned is advised to add more water after first drain, and to repeat the drain process, so i add another 1 liter of cold water

Unexpected issue:
1. it turns cloudy gray again and looks more thicker mixture than the beginning
2. then it started bigger bubbles
3. it has more heat now i tried to touch it, so I pour out again and add the third 1 liter of cold water
4. 3 mins after I pour out all the cloudy gray water, the aluminium foil react itself and produce smoke cover entire lab, the flask is so cold and has water droplets on the flask surface

should I pour P2NP solution directly after the first cloudy gray water drain? because the later reaction seems like the reactions of adding P2NP in the video
 

HIGGS BOSSON

Expert
Joined
Jul 5, 2021
Messages
414
Reaction score
578
Points
93
No problem, the amalgam is ready, and you can pour a solution of phenylnitropropene.
Or, to gain experience with the first synthesis, you can not wash from mercury salts in order to clearly see the process of the chemical reaction
 
Last edited by a moderator:

malayboy

Don't buy from me
Resident
Joined
Apr 15, 2022
Messages
57
Reaction score
35
Points
18
i had successfully reach the stage on all foil rise up and covered with small bubbles, in cloudy gray water

NfVegTmQtK



then I drain the water from it through a fine sieve

Mh5Cv4dMTS


then instructions say advisable to add water again in order to rinse the amalgam from residues of mercury nitrate

9cWV5fRUMS


so I added cold tap water, the reaction started to get more and bigger bubbles, and that is how the mass goes wrong

so I having thoughts on this stage:

No problem, the amalgam is ready, and you can pour a solution of phenylnitropropene.
HIGGS BOSSON1. if the amalgam is ready, shouldn't drain out and add more cold distilled water to rinse out residues of mercury nitrate?

2. if we need to rinse out the mercury nitrate, I should add cold distilled water, yes?
 

WillD

Expert
Joined
Jul 19, 2021
Messages
645
Reaction score
889
Points
93
1. if the amalgam is ready, shouldn't drain out and add more cold distilled water to rinse out residues of mercury nitrate?
malayboyMust drain, and pour quickly a fresh portion of clean water. But if there is little experience, do the first reactions without additional washing.
2. if we need to rinse out the mercury nitrate, I should add cold distilled water, yes?
Not necessarily ice water, the main thing is pure (drinking) water
 

malayboy

Don't buy from me
Resident
Joined
Apr 15, 2022
Messages
57
Reaction score
35
Points
18
Must drain, and pour quickly a fresh portion of clean water. But if there is little experience, do the first reactions without additional washing.

Not necessarily ice water, the main thing is pure (drinking) water
William Dampiermany thanks to your reply sir, will get a few experiments again
 

ACAB

Don't buy from me
Resident
Joined
Mar 27, 2022
Messages
291
Reaction score
165
Points
43
I need it for 500g amaphetamin sulfat each process.
TaimoHave you also just run out of battery in your calculator, or do you not know how to calculate it?
I can give you some advice, one mole of P2NP theoretically becomes one mole of freebase and with half a mole of sulfuric acid we get half a mole of sulfate. The actual percentage yield is calculated using this theory. The rest should be a walk in the park.
.
 

WinterDust

See my products
Seller
Joined
May 21, 2022
Messages
233
Reaction score
200
Points
43
Deals
3
Question about the process:

When the P2nP mix i added with the amalgam and the exothermic process begins.

1 - Does the mix need to stay at a certain temperature during this synthesis or can it be cooled and stirred during this process?

2 - Does the mix need to be contained so that the vape get condensated back in to the mix or can the procedure be made in an open barrel as well, question is related to larger batches P2nP 500g-1000g+.

3 - If multiple batches are made but during different times, is it possible to store the freebase from each batch in a glascontainer for later use or will it "go bad" ?

Thank You
 

ACAB

Don't buy from me
Resident
Joined
Mar 27, 2022
Messages
291
Reaction score
165
Points
43
Does the mix need to stay at a certain temperature during this synthesis or can it be cooled and stirred during this process?
EyelowThe mix must be cooled at beginning because of strong exothermic reaction, try to get and hold the mix at 60°C. btw. at 95°C you have a volcano.
2 - Does the mix need to be contained so that the vape get condensated back in to the mix or can the procedure be made in an open barrel as well, question is related to larger batches P2nP 500g-1000g+.
You should use something like a condenser because the IPA evaporates very fast due to the exothermic reaction. btw. I would never use such a high amount of P2NP, because I think that already 50g P2NP is hard to handle. Be warned and take care of yourself
3 - If multiple batches are made but during different times, is it possible to store the freebase from each batch in a glascontainer for later use or will it "go bad" ?
I can't say for sure, but I've heard that the freebase is not very stable and degrades over time. Avoid heat, air, light and oxygen in any case.
 

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,386
Solutions
3
Reaction score
2,326
Points
113
Deals
1
- Does the mix need to stay at a certain temperature during this synthesis or can it be cooled and stirred during this process?
EyelowKeep it at 55-60 degrees C during reaction is going on.
2 - Does the mix need to be contained so that the vape get condensated back in to the mix or can the procedure be made in an open barrel as well, question is related to larger batches P2nP 500g-1000g+.
you will lose a lot of solvent without reflux condenser
3 - If multiple batches are made but during different times, is it possible to store the freebase from each batch in a glascontainer for later use or will it "go bad" ?
You shouldn't. It will be oxidized by oxigen from air. Also, light have influence as well. You can try to keep some quantity for some time in dark glass and freezer but you have to distill it before further synthesis.
 

MrSung

Don't buy from me
Resident
Joined
Mar 23, 2022
Messages
61
Reaction score
16
Points
8
Hello, anyone here who can scale me this Synthese from Amphetamin to P2NP via Al/Hg larger?
I need it for 500g amaphetamin sulfat each process.
Kind regards
Taimo
I don't think you will be able to handle 500g of P2NP, the reaction is very exothermic. I will advice you to start small with something like 10-40g and until you master the procedure then you can slowly increase if you are really into serious business. You have to crawl before you walk, with 500g means you wanna run
 

Taimo

Don't buy from me
New Member
Joined
Mar 13, 2022
Messages
7
Reaction score
8
Points
3
okay, then i make it smaller for the first times. On weekend i can start
 

BHBlueberry

Don't buy from me
New Member
Joined
Jan 17, 2022
Messages
20
Reaction score
9
Points
3
One question:

Why the fuck are you using thin aluminum cooking foil instead of solid pieces cut from non-elastic aluminum plate?

It doesn't make any sense letting everything get destroyed and let it solute in the mix instead of when you can get everything out after reaction..
 
  • Free product samples

    Testing products from new vendors and manufacturers.

    Get free samples for testing now!

  • Always stay in touch with BB forum. Element/Matrix.

    Connect notifications to always stay in touch with the forum!

    Connect

  • The BB Forum team is looking for cooperation:

    • Traffic arbitrage specialists
    • Spammers
    • Advertising agencies
    • Bloggers/Vloggers
    • TOR sites directories
    • Creative people who can create viral content
    • Administrators of Telegram Channels and Groups

      We will pay more for your traffic than our competitors! $0.1 per visitor!!!If you are interested in, write to the administrator.
Top