• The BB team is looking for employees, who are ready to work with mephedrone, amphetamine, methamphetamine and other substances.
    High wage! Stable job.

    Requirements:

    • Make a minimum deposit of 50 EUR
    • Receive a batch of goods (from 25 g and more, depending on the deposit)
    • Pack the goods in bags (1-2g) and hide them in safe places in your city.

    We going to do the rest work! As soon as the goods are sold, you'll get money for each successfully sold package!

    Relevant for all EU countries and UK

    Contact : @Madre

Home mephedrone (4-MMC) purification method

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,387
Solutions
3
Reaction score
2,327
Points
113
Deals
1
4-Methyl-N-methylcathinone is a powerful synthetic stimulant drug and cheap euphoretic. Importantly, it is most demanded and wide common. It is known that big number of drugs on dark market are sold without purification (with enormous number of side synthesis substances). Using of these drugs can cause physical and psychological harm. Purification is a way to minimize the risks of drug use.

In this article, I show home purification method for dirty mephedrone. You don't need a chemical laboratory, you need a kitchen and some stuff, which you can buy in any pharmacy or public store.​

You need:
1. A mephedrone for purification.
2. The mixture of ethyl acetate:acetone, 4:1. It takes 20 ml of mixture for 1 g drug.
3. Metal cups for water bath and evaporation procedure.
4. A filter paper or filters for a coffee machine.

Procedure:
Suspension preparation
1. Pour the mephedrone powder into the mixture of ethyl acetate and acetone.
2. Mix it thoroughly until a suspension is obtained.

Heating and evaporation.
3.
.
1
.
2
3
Cooling and settling.
4. Pure mephedrone will be crystallized partially because it is not solved in acetone, but at the same time it is solved in ethyl acetate partially. Organic side substances, which have to be removed from mephedrone, are solved in acetone.
4
5. After that, wait until the solution would be cooled to room temperature. Put the plate with solution into a fridge for 2 hours (3-5 degrees).
Filtration and washing.
6.
5
7.
.
6
.
7
8. Wash your crystals by an acetone 2-3 times.
.
8

Conclusion.
As you can see, the procedure isn't complicated. It should be noted that the mother liquor (the filtered solution) contain approximately 5-10% of mephedrone. You can evaporate this solution by 3/4, until crystals appearing, and repeat stages №5-8 of the procedure.
 
Last edited by a moderator:

Novator

Resident
Joined
Oct 30, 2021
Messages
39
Reaction score
645
Points
83

KMt1Ga9mLI

Cleaning the drug in 10 minutes. Small volumes.

One of the most frequent questions is how to clean the purchased drug (crystals/powders). It is also one of the basic skills of an advanced consumer, sometimes the results of such a simple cleaning are striking.
  • Why clean if always used as is?
- For example, this is necessary for intravenous use (the cleaner the drug, the safer), in addition, it affects the purity of the exposure, as well as the severity and variety of side effects.

Then I give a universal instruction, following which you can easily wash not everything from the residues of synthesis by-products, but a lot. If the drug is purified by this method, as a rule, the weight loss of the final product is small.
  • How to determine what can be cleaned according to this instruction?
-The main parameter of a suitable drug for cleaning is insolubility in anhydrous acetone and cold isopropyl alcohol. Most of the impurities in street drugs are from laboratories due to negligence in synthesis. And impurities, of course, reduce the shelf life of the drug, spoil the commercial species, worsen the force of exposure, and also increase the risk of poisoning.


IAgUNQLsSX


Consider a method of purifying mephedrone in powder form.
If it's a crystal, it doesn't mean it's clean. Therefore, the mephedrone crystals are cleaned in the same way, ground as much as possible to a uniform state.

The principle of the process is elementary. A filter is assembled from the available means, which will retain mephedrone, but pass flushes with impurities (impurities dissolve in cooled acetone/alcohol, and mephedrone is insoluble). The impurity extractant is then forced out of the filter under pressure, leaving the pure product. If necessary, the process can be repeated by adding a new portion of extractant.



RA3WniGaEQ


What will be needed and what to do?
  • Chilled extractant (anhydrous acetone or absoluted isopropanol);
  • Mephedrone of any hue and humidity 3 g;
  • Cotton wool 0.5x0.5 cm;
  • Syringe 5-20 ml 1pc;
  • Waste glass;
  • Petri Dish (any plate is suitable);
  • Pipette 3 ml.
In a syringe, we put a tiny piece of cotton wetted in extractant. It'll hold the clean mephedrone inside. If there is a lot of cotton wool, the design will lose functionality. If the cotton wool is too small, or it does not cover the hole, then part of the mephedrone will come out with the waste.
N0NGuMOLwE

We grind mephedrone into dust and pour it into a syringe over the cotton wool, you can slightly compress. A third of the free space for the extractant should remain in the syringe.
VQtHSfPM16

Using a pipette, we fill the remains with the syringe with a cooled extractant (in the photo, the extractant is marked with the number 1). As it moves, it will be visible how impurities leave (in the photo you can see in the field at number 2).
ISKJ9cL3Fj

Next, we insert the piston into the syringe cylinder and squeeze the extractant through the mephedrone with some force. The eyes will see how the dirt moves to the filter, and then leaves the syringe in a waste glass.
W5zHl8iZRk

The indicator of mephedrone purity is the color of the extractant drop leaving the filter. The drop should be transparent and without color. If necessary, add fresh extractant to remove impurities without residue.
W7na9k8qeG

The impurity extractant should be discarded. It won't be useful anywhere else.
9ft8lGmXjJ

The syringe contents are now placed on a Petri dish to further evaporate the extractant residues. We remove a piece of cotton from the mephedrone, it will no longer be useful. The evaporation of the extractant can be accelerated in a water bath or other heating elements.
Pivykm7fdO

Upon reaching a constant weight and the absence of the smell of the extractant, cleaning can be considered completed. This method does not give 99.9% purity of the product, but this is the best of the most affordable and simple. After such cleaning, the substance is suitable for consumption. For greater purity and commercial appearance, the obtained powder can be subjected to a slow recrystallization method (and another recrystallization method).

765n8bkMQB

  • Can amphetamine (sulfate, phosphate, hydrochloride) be purified by this method?
-You can. Amphetamine is insoluble in acetone and isopropanol.
  • Can methamphetamine be cleaned in this way?
- No, the process should be conducted very differently. Methamphetamine, like many other drugs (a-pvp), is soluble in acetone and isopropanol. If it is very necessary to at least slightly increase purity, a similar purification method can be followed (to be described in another topic).
  • Such washing will remove impurities added by the dealer (caffeine, etc.)?
-Mostly not. Such impurities, as well as the drug, do not dissolve in the extractants used. Consequently, all additives will remain with the product.
  • What else can we do to make the product cleaner?
- Of course, recrystallization. But you're interested in more serious ways?
Acid-alkaline extraction is available from simple means. But here a skill in working with chemicals and a number of tools will already be useful. Also, this method is not suitable for the purification of mephedrone and a-pvp (mdpv). And the loss of the final product can be 40% of the starting mass, if done incorrectly.
- Of the more complicated methods -
distillation of the free base of the drug in a deep vacuum. For example, this method allows you to obtain a free base of amphetamine of exceptional purity even before crystallization with acids, therefore, without traces of the synthesis steps passed. During distillation in a vacuum, all heavy impurities remain in the original flask, and the drug in the form of a free base condenses into a receiving flask. You can also distill the free base in a vacuum with water vapors, but this is a more time-consuming and somewhat less effective purification route.
 
Last edited by a moderator:

Dablab

Don't buy from me
New Member
Joined
Nov 16, 2023
Messages
1
Reaction score
1
Points
3

Cleaning the drug in 10 minutes. Small volumes.

One of the most frequent questions is how to clean the purchased drug (crystals/powders). It is also one of the basic skills of an advanced consumer, sometimes the results of such a simple cleaning are striking.
  • Why clean if always used as is?
- For example, this is necessary for intravenous use (the cleaner the drug, the safer), in addition, it affects the purity of the exposure, as well as the severity and variety of side effects.

Then I give a universal instruction, following which you can easily wash not everything from the residues of synthesis by-products, but a lot. If the drug is purified by this method, as a rule, the weight loss of the final product is small.
  • How to determine what can be cleaned according to this instruction?
-The main parameter of a suitable drug for cleaning is insolubility in anhydrous acetone and cold isopropyl alcohol. Most of the impurities in street drugs are from laboratories due to negligence in synthesis. And impurities, of course, reduce the shelf life of the drug, spoil the commercial species, worsen the force of exposure, and also increase the risk of poisoning.


View attachment 3435

Consider a method of purifying mephedrone in powder form.


The principle of the process is elementary. A filter is assembled from the available means, which will retain mephedrone, but pass flushes with impurities (impurities dissolve in cooled acetone/alcohol, and mephedrone is insoluble). The impurity extractant is then forced out of the filter under pressure, leaving the pure product. If necessary, the process can be repeated by adding a new portion of extractant.



View attachment 3436

What will be needed and what to do?
  • Chilled extractant (anhydrous acetone or absoluted isopropanol);
  • Mephedrone of any hue and humidity 3 g;
  • Cotton wool 0.5x0.5 cm;
  • Syringe 5-20 ml 1pc;
  • Waste glass;
  • Petri Dish (any plate is suitable);
  • Pipette 3 ml.
In a syringe, we put a tiny piece of cotton wetted in extractant. It'll hold the clean mephedrone inside. If there is a lot of cotton wool, the design will lose functionality. If the cotton wool is too small, or it does not cover the hole, then part of the mephedrone will come out with the waste.

We grind mephedrone into dust and pour it into a syringe over the cotton wool, you can slightly compress. A third of the free space for the extractant should remain in the syringe.

Using a pipette, we fill the remains with the syringe with a cooled extractant (in the photo, the extractant is marked with the number 1). As it moves, it will be visible how impurities leave (in the photo you can see in the field at number 2).

Next, we insert the piston into the syringe cylinder and squeeze the extractant through the mephedrone with some force. The eyes will see how the dirt moves to the filter, and then leaves the syringe in a waste glass.

The indicator of mephedrone purity is the color of the extractant drop leaving the filter. The drop should be transparent and without color. If necessary, add fresh extractant to remove impurities without residue.

The impurity extractant should be discarded. It won't be useful anywhere else.

The syringe contents are now placed on a Petri dish to further evaporate the extractant residues. We remove a piece of cotton from the mephedrone, it will no longer be useful. The evaporation of the extractant can be accelerated in a water bath or other heating elements.

Upon reaching a constant weight and the absence of the smell of the extractant, cleaning can be considered completed. This method does not give 99.9% purity of the product, but this is the best of the most affordable and simple. After such cleaning, the substance is suitable for consumption. For greater purity and commercial appearance, the obtained powder can be subjected to a slow recrystallization method (and another recrystallization method).

View attachment 3444
  • Can amphetamine (sulfate, phosphate, hydrochloride) be purified by this method?
-You can. Amphetamine is insoluble in acetone and isopropanol.
  • Can methamphetamine be cleaned in this way?
- No, the process should be conducted very differently. Methamphetamine, like many other drugs (a-pvp), is soluble in acetone and isopropanol. If it is very necessary to at least slightly increase purity, a similar purification method can be followed (to be described in another topic).
  • Such washing will remove impurities added by the dealer (caffeine, etc.)?
-Mostly not. Such impurities, as well as the drug, do not dissolve in the extractants used. Consequently, all additives will remain with the product.
  • What else can we do to make the product cleaner?
- Of course, recrystallization. But you're interested in more serious ways?
Acid-alkaline extraction is available from simple means. But here a skill in working with chemicals and a number of tools will already be useful. Also, this method is not suitable for the purification of mephedrone and a-pvp (mdpv). And the loss of the final product can be 40% of the starting mass, if done incorrectly.
- Of the more complicated methods -
distillation of the free base of the drug in a deep vacuum. For example, this method allows you to obtain a free base of amphetamine of exceptional purity even before crystallization with acids, therefore, without traces of the synthesis steps passed. During distillation in a vacuum, all heavy impurities remain in the original flask, and the drug in the form of a free base condenses into a receiving flask. You can also distill the free base in a vacuum with water vapors, but this is a more time-consuming and somewhat less effective purification route.
NovatorJust (i think) successfully cleaned 2g using this method, no yellow came out though only a milky cloudy liquid, i used 99.99% isoproponol, lost roughly 8% net weight so assume i musta washed off some adulterants , definitely come out whiter then pre wash, thanks for the tips
 

Vasile

Don't buy from me
Resident
Joined
Sep 28, 2023
Messages
13
Reaction score
15
Points
3

Cleaning the drug in 10 minutes. Small volumes.

One of the most frequent questions is how to clean the purchased drug (crystals/powders). It is also one of the basic skills of an advanced consumer, sometimes the results of such a simple cleaning are striking.
  • Why clean if always used as is?
- For example, this is necessary for intravenous use (the cleaner the drug, the safer), in addition, it affects the purity of the exposure, as well as the severity and variety of side effects.

Then I give a universal instruction, following which you can easily wash not everything from the residues of synthesis by-products, but a lot. If the drug is purified by this method, as a rule, the weight loss of the final product is small.
  • How to determine what can be cleaned according to this instruction?
-The main parameter of a suitable drug for cleaning is insolubility in anhydrous acetone and cold isopropyl alcohol. Most of the impurities in street drugs are from laboratories due to negligence in synthesis. And impurities, of course, reduce the shelf life of the drug, spoil the commercial species, worsen the force of exposure, and also increase the risk of poisoning.


View attachment 3435

Consider a method of purifying mephedrone in powder form.


The principle of the process is elementary. A filter is assembled from the available means, which will retain mephedrone, but pass flushes with impurities (impurities dissolve in cooled acetone/alcohol, and mephedrone is insoluble). The impurity extractant is then forced out of the filter under pressure, leaving the pure product. If necessary, the process can be repeated by adding a new portion of extractant.



View attachment 3436

What will be needed and what to do?
  • Chilled extractant (anhydrous acetone or absoluted isopropanol);
  • Mephedrone of any hue and humidity 3 g;
  • Cotton wool 0.5x0.5 cm;
  • Syringe 5-20 ml 1pc;
  • Waste glass;
  • Petri Dish (any plate is suitable);
  • Pipette 3 ml.
In a syringe, we put a tiny piece of cotton wetted in extractant. It'll hold the clean mephedrone inside. If there is a lot of cotton wool, the design will lose functionality. If the cotton wool is too small, or it does not cover the hole, then part of the mephedrone will come out with the waste.

We grind mephedrone into dust and pour it into a syringe over the cotton wool, you can slightly compress. A third of the free space for the extractant should remain in the syringe.

Using a pipette, we fill the remains with the syringe with a cooled extractant (in the photo, the extractant is marked with the number 1). As it moves, it will be visible how impurities leave (in the photo you can see in the field at number 2).

Next, we insert the piston into the syringe cylinder and squeeze the extractant through the mephedrone with some force. The eyes will see how the dirt moves to the filter, and then leaves the syringe in a waste glass.

The indicator of mephedrone purity is the color of the extractant drop leaving the filter. The drop should be transparent and without color. If necessary, add fresh extractant to remove impurities without residue.

The impurity extractant should be discarded. It won't be useful anywhere else.

The syringe contents are now placed on a Petri dish to further evaporate the extractant residues. We remove a piece of cotton from the mephedrone, it will no longer be useful. The evaporation of the extractant can be accelerated in a water bath or other heating elements.

Upon reaching a constant weight and the absence of the smell of the extractant, cleaning can be considered completed. This method does not give 99.9% purity of the product, but this is the best of the most affordable and simple. After such cleaning, the substance is suitable for consumption. For greater purity and commercial appearance, the obtained powder can be subjected to a slow recrystallization method (and another recrystallization method).

View attachment 3444
  • Can amphetamine (sulfate, phosphate, hydrochloride) be purified by this method?
-You can. Amphetamine is insoluble in acetone and isopropanol.
  • Can methamphetamine be cleaned in this way?
- No, the process should be conducted very differently. Methamphetamine, like many other drugs (a-pvp), is soluble in acetone and isopropanol. If it is very necessary to at least slightly increase purity, a similar purification method can be followed (to be described in another topic).
  • Such washing will remove impurities added by the dealer (caffeine, etc.)?
-Mostly not. Such impurities, as well as the drug, do not dissolve in the extractants used. Consequently, all additives will remain with the product.
  • What else can we do to make the product cleaner?
- Of course, recrystallization. But you're interested in more serious ways?
Acid-alkaline extraction is available from simple means. But here a skill in working with chemicals and a number of tools will already be useful. Also, this method is not suitable for the purification of mephedrone and a-pvp (mdpv). And the loss of the final product can be 40% of the starting mass, if done incorrectly.
- Of the more complicated methods -
distillation of the free base of the drug in a deep vacuum. For example, this method allows you to obtain a free base of amphetamine of exceptional purity even before crystallization with acids, therefore, without traces of the synthesis steps passed. During distillation in a vacuum, all heavy impurities remain in the original flask, and the drug in the form of a free base condenses into a receiving flask. You can also distill the free base in a vacuum with water vapors, but this is a more time-consuming and somewhat less effective purification route.
NovatorWhen you reffer to :

'Using a pipette, we fill the remains with the syringe with a cooled extractant (in the photo, the extractant is marked with the number 1)'

What do you mean cooled extractant, should i put the 99% isopropanol in the fridge or what temperature should it have?
 

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,387
Solutions
3
Reaction score
2,327
Points
113
Deals
1
When you reffer to :

'Using a pipette, we fill the remains with the syringe with a cooled extractant (in the photo, the extractant is marked with the number 1)'

What do you mean cooled extractant, should i put the 99% isopropanol in the fridge or what temperature should it have?
VasileIt's worth to cool it in fridge (2-4*C) in order to reduce 4-mmc solubility and losses.
 
Last edited:

Vasile

Don't buy from me
Resident
Joined
Sep 28, 2023
Messages
13
Reaction score
15
Points
3
When you reffer to :

'Using a pipette, we fill the remains with the syringe with a cooled extractant (in the photo, the extractant is marked with the number 1)'

What do you mean cooled extractant, should i put the 99% isopropanol in the fridge or what temperature should it have?
VasileGot it, thank you!
 

karamelosanto

Don't buy from me
New Member
Joined
Apr 14, 2022
Messages
15
Reaction score
4
Points
3
Can I clean other methcathinones with this method (methylone, efedrone, etc)?
 

Burrissah

Don't buy from me
New Member
Joined
May 4, 2022
Messages
9
Reaction score
1
Points
3
Anyone got a reliable source for mephedrone? Or the pre curses used?
 

Bazooka90

Don't buy from me
Resident
Joined
May 8, 2022
Messages
39
Reaction score
3
Points
8
Cam i clean 3cmc with this method?
 

SonicNL

Don't buy from me
Resident
Joined
Feb 22, 2023
Messages
84
Reaction score
66
Points
18
How much is usually lost when made in dcm?
 

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,387
Solutions
3
Reaction score
2,327
Points
113
Deals
1

SonicNL

Don't buy from me
Resident
Joined
Feb 22, 2023
Messages
84
Reaction score
66
Points
18
Hello, what do you mean? "made in dcm"? Can you clarify your question please?
G.PattonHow much yield you get from purifying 4-mmc powder when synthesis is done with dcm as solvent? I read it already gives a pretty pure product.
 

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,387
Solutions
3
Reaction score
2,327
Points
113
Deals
1
How much yield you get from purifying 4-mmc powder when synthesis is done with dcm as solvent? I read it already gives a pretty pure product.
SonicNLI can't answer you by reason that a recrystallization yield depends on product purity and can be absolutely different in every batch.
 
Last edited:

mejdubulok

Don't buy from me
New Member
Joined
Dec 21, 2022
Messages
23
Reaction score
24
Points
3
incredible! amazing! you guys are awesome. 🙏❤️
 

Heineken

Don't buy from me
Member
Joined
Jun 8, 2023
Messages
112
Reaction score
54
Points
28
Wash teach and get pure 4mmc✓
 

Attachments

  • 1byhC5N0U6.jpg
    1byhC5N0U6.jpg
    421.3 KB · Views: 285
  • hFUqmPyOYD.jpg
    hFUqmPyOYD.jpg
    369.1 KB · Views: 280
  • MIcb2TaO5X.jpg
    MIcb2TaO5X.jpg
    359.2 KB · Views: 284
  • D1AtqEHRl0.jpg
    D1AtqEHRl0.jpg
    363.2 KB · Views: 322

Heineken

Don't buy from me
Member
Joined
Jun 8, 2023
Messages
112
Reaction score
54
Points
28
Wash good color is no problem.
Crystal must me white glass
 

Attachments

  • C3DOZt1LqE.mp4
    3.4 MB · Views: 0
  • Free product samples

    Testing products from new vendors and manufacturers.

    Get free samples for testing now!

  • Always stay in touch with BB forum. Element/Matrix.

    Connect notifications to always stay in touch with the forum!

    Connect

  • The BB Forum team is looking for cooperation:

    • Traffic arbitrage specialists
    • Spammers
    • Advertising agencies
    • Bloggers/Vloggers
    • TOR sites directories
    • Creative people who can create viral content
    • Administrators of Telegram Channels and Groups

      We will pay more for your traffic than our competitors! $0.1 per visitor!!!If you are interested in, write to the administrator.
Top