• The BB team is looking for employees, who are ready to work with mephedrone, amphetamine, methamphetamine and other substances.
    High wage! Stable job.

    Requirements:

    • Make a minimum deposit of 50 EUR
    • Receive a batch of goods (from 25 g and more, depending on the deposit)
    • Pack the goods in bags (1-2g) and hide them in safe places in your city.

    We going to do the rest work! As soon as the goods are sold, you'll get money for each successfully sold package!

    Relevant for all EU countries and UK

    Contact : @Madre

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,387
Solutions
3
Reaction score
2,327
Points
113
Deals
1

Introduction
PiXSqn2KLe

LSD is an unusually fragile molecule, and some comments are in order as to its stability and storage. As a salt, in water, cold, and free from air and light exposure, it is stable indefinitely. There are two sensitive aspects of its structure. The position of the carboxamide attachment, the 8-position, is affected by basic, or high pH, conditions. Through a process called epimerization, this position can scramble, producing isolysergic acid diethylamide, or iso-LSD. This product is biologically inactive, and represents a loss of a proportionate amount of active product. A second and separate point of instability is the double bond that lies between this 8-position and the aromatic ring. Water or alcohol can add to this site, especially in the presence of light (sunlight with its ultraviolet energy is notoriously bad) to form a product that has been called lumi-LSD, which is totally inactive in man. Oh yes, and often overlooked, there may be only an infinitesimal amount of chlorine in treated tap water, but then there is only an infinitesimal amount of LSD in a typical LSD solution. And since chlorine will destroy LSD on contact, the dissolving of LSD in tap water is not appropriate.

There are many synthetic methods developed and reported for the preparation of LSD. All of them start with lysergic acid, and for that reason, it has been listed as a Schedule III controlled drug, as a depressant, under Federal law. The amide lysergamide, a component of several varieties of Morning glory seed, is also a controlled drug and, by law, a depressant.

The extraction procedure of Ergotamine from tablets is the same as in
this method.

Equipment and glassware: PwBNck7Wgo

Reagents:

  • Ergotamine tartrate (ET) 10 g;
  • Potassium hydroxide solution (KOH) 6.7 g in 100 mL H2O;
  • Sulfuric acid ~100 mL 2.5 N (H2SO4);
  • Diethyl ether (Et2O) ~200 mL;
  • Ammonia (NH3) anhydrous ethanol solution 50 mL 15%;
  • Aqueous ammonia (NH4OH) 50 mL of 1% + 200 mL 1 N;
  • Diethylamine (Et2N) 7.1 g;
  • Chloroform (CHCl3) ~350 mL;
  • Phosphoryl chloride (POCl3) 3.4 g;
  • Magnesium sulphate (MgSO4) anhydrous ~100 g;
  • Hexane ~200 mL;
  • Dry methanol (MeOH) ~100 mL;
  • Dry d-Tartaric acid (0.232 g per 1 g of LSD base);
  • Distilled water ~ 500 mL.
L5zFy02Vux
9,10-Didehydro-N,N-diethyl-6-methylergoline-8β-carboxamide tartrate:
Boiling Point: N/A;
Melting Point: 200 °C;
Molecular Weight: 473.5 g/mole;
Density: N/A;
CAS Number: 17676-08-3.

Procedure

d-Lysergic acid hydrate
A solution of 6.7 g KOH in 100 mL H2O, under an inert atmosphere and magnetically stirred, was brought to 75 °C, and 10 g ergotamine tartrate (ET) (1) added in 500 mL round bottom flask. The reaction mixture turned yellow as the ergotamine went into solution over the course of 1 h. The stirring was continued for an additional 3 h. The reaction mixture was cooled to about 10 °C with an external ice bath, and acidified to a pH of about 3.0 by the dropwise addition of 2.5 N H2SO4. White solids started to appear early in the neutralization; approximately 60 mL of sulfuric acid (H2SO4) was required. The reaction mixture was cooled overnight, the solids removed by filtration, and the filter cake washed with 10 mL Et2O. The dry solids were transferred to a beaker, suspended in 50 mL 15% ammonia in anhydrous ethanol, stirred for 1 h, and separated by decantation. This extraction was repeated, and the original decantation and the second extract combined and filtered to remove a few hundred milligrams of unwanted solids. The clear filtrate was stripped of solvent under vacuum, the residual solids dissolved in 50 mL of 1% aqueous ammonia, and this solution was acidified as before with 2.5 N H2SO4. The precipitated solids were removed by filtration and washed with Et2O until free of color. After drying under vacuum to a constant weight, there was obtained 3.5 g of d-lysergic acid hydrate (2), which should be stored in a dark, sealed container.
418w0ErhlW

Lysergic acid diethylamide (LSD) free-base
A suspension of 3.15 g d-lysergic acid hydrate (2) and 7.1 g of diethylamine in 150 mL CHCl3 was brought to reflux with stirring. With the external heating removed, there was added 3.4 g POCl3 over the course of 2 min, at a rate sufficient to maintain refluxing conditions. The mixture was held at reflux for an additional 5 min, at which point everything had gone into solution. After returning to room temperature, the solution was added to 200 mL of 1 N NH4OH. The phases were separated, the organic phase dried over anhydrous MgSO4, filtered, and the solvent removed under vacuum. The residue was chromatographed over alumina with elution employing a 3:1 C6H6/CHCl3 mixture, and the collected fraction stripped of solvent under hard vacuum to a constant weight. This free-base solid (3) can be recrystallized from benzene to give white crystals with a melting point of 87-92 °C.
ERyurM0ndI

Lysergic acid diethylamide (LSD) tartrate
This base was dissolved in warm, dry MeOH, using 4 mL per 1 g of product. There was then added dry d-tartaric acid (0.232 g per 1 g of LSD base), and the clear warm solution treated with Et2O dropwise until the cloudiness did not dispel on continued stirring (use 100 mL RBF in this case). This opaqueness set to a fine crystalline suspension (this is achieved more quickly with seeding) and the solution allowed to crystallize overnight in the refrigerator. Ambient light should be severely restricted during these procedures. The product was removed by filtration, washed sparingly with cold methanol, with a cold 1:1 MeOH/Et2O mixture, and then dried to constant weight. The white crystalline product was lysergic acid diethylamide tartrate with two molecules of methanol of crystallization, with an m.p. of about 200 °C with decomposition, and weighed 3.11 g (66%).
UPMfwL8472
Repeated recrystallizations from methanol produced a product that became progressively less soluble, and eventually virtually insoluble, as the purity increased. A totally pure salt, when dry and when shaken in the dark, will emit small flashes of white light.

Medicines containing Ergotamine
QA7edUW2Ix

There is the list of medicine which are containing Ergotamine:
  • Brand names: Belcomp-PB, Cafatine PB, Micomp-PB, Ergocomp-PB
  • Contain: Belladonna/caffeine/ergotamine/pentobarbital systemic

  • Brand names: Bellergal-S, Spastrin, Eperbel-S, Bellamor
  • Contain: Belladonna/ergotamine/phenobarbital

  • Brand names: Cafergot, Cafetrate, Wigraine, Ercaf
  • Contain: Caffeine/ergotamine systemic

There are many different medicines that contain ergotamine. You can search on Amazon or other search resource in your country.
 
Last edited by a moderator:

pedrojosh

Don't buy from me
New Member
Joined
Apr 28, 2022
Messages
2
Reaction score
0
Points
1
hello

can i used this ergotamine+caffeine, but using the lsd synthesis process from foster beer?
 

HerrHaber

Don't buy from me
Resident
Joined
Jan 15, 2023
Messages
435
Reaction score
224
Points
43
Does anyone know what brand name of ergot alkaloid tablets can be sourced in Eastern Europe (Hungary maybe)... excepting dihydroergostuff and bromocryptine for which I would much appreciate some writeup for it's safe debromination. Thank you in advance my friends!
 

HIGGS BOSSON

Expert
Joined
Jul 5, 2021
Messages
414
Reaction score
579
Points
93
Does anyone know what brand name of ergot alkaloid tablets can be sourced in Eastern Europe (Hungary maybe)... excepting dihydroergostuff and bromocryptine for which I would much appreciate some writeup for it's safe debromination. Thank you in advance my friends!
HerrHaberErgotamine:
Cafergot
Ergomar
Migergot
Bellergal-S
Ergostat
Medihaler-Ergotamine
Spastrin
Wigraine
 

csigger

Don't buy from me
Resident
Joined
Sep 12, 2022
Messages
16
Reaction score
8
Points
3
Does anyone know what brand name of ergot alkaloid tablets can be sourced in Eastern Europe (Hungary maybe)... excepting dihydroergostuff and bromocryptine for which I would much appreciate some writeup for it's safe debromination. Thank you in advance my friends!
HerrHaberI have lysergic acid in hungary. :)
 

blosuetoday

Don't buy from me
Resident
Joined
Oct 28, 2022
Messages
44
Reaction score
26
Points
18
That is insane, we even have LSD synthesises here. Internet is an amazing thing these days.
 

Ergot

Don't buy from me
Member
Joined
Jan 9, 2023
Messages
2
Reaction score
3
Points
3
Very nice write up, thank you this is great!
 

ieatfungi

Don't buy from me
New Member
Joined
Mar 10, 2023
Messages
2
Reaction score
0
Points
1
Yoyoyo could anyone perhaps assist me in locating some ergotamine tartarate or containing medicines in the U.S? Any assistance is appreciated ;)
 

Sneaky.Base

Don't buy from me
Resident
Joined
Nov 17, 2022
Messages
31
Reaction score
7
Points
8
General patton shares love to those who need love. ❤️
 

Sneaky.Base

Don't buy from me
Resident
Joined
Nov 17, 2022
Messages
31
Reaction score
7
Points
8
3 grams of lsd gives 20000 to 30000 doses , excuse my noob question, how did they separate this exact small quantity to blotter on 30000 doses?
Tnx for any reply
 

amieri

Don't buy from me
Resident
Joined
Jun 2, 2023
Messages
17
Reaction score
9
Points
3
3 grams of lsd gives 20000 to 30000 doses , excuse my noob question, how did they separate this exact small quantity to blotter on 30000 doses?
Tnx for any reply
Sneaky.BaseBy making a solution in distilled water or ethanol.each 1/4"×1/4" tab of blotter can hold x amount of liquid
 

Sneaky.Base

Don't buy from me
Resident
Joined
Nov 17, 2022
Messages
31
Reaction score
7
Points
8
Can smb do the synthesis with .1 of all reagents? (1gr ergotamine , 10 ml koh , 10 ml h2so4 , 20 ml diethylether, ...)
 

Ergot

Don't buy from me
Member
Joined
Jan 9, 2023
Messages
2
Reaction score
3
Points
3
Can smb do the synthesis with .1 of all reagents? (1gr ergotamine , 10 ml koh , 10 ml h2so4 , 20 ml diethylether, ...)
Sneaky.BaseI think you're going to lose all product in the several filtration steps in between.
 

Macondor

Don't buy from me
Resident
Joined
May 14, 2023
Messages
29
Reaction score
5
Points
3

Introduction View attachment 4053

LSD is an unusually fragile molecule, and some comments are in order as to its stability and storage. As a salt, in water, cold, and free from air and light exposure, it is stable indefinitely. There are two sensitive aspects of its structure. The position of the carboxamide attachment, the 8-position, is affected by basic, or high pH, conditions. Through a process called epimerization, this position can scramble, producing isolysergic acid diethylamide, or iso-LSD. This product is biologically inactive, and represents a loss of a proportionate amount of active product. A second and separate point of instability is the double bond that lies between this 8-position and the aromatic ring. Water or alcohol can add to this site, especially in the presence of light (sunlight with its ultraviolet energy is notoriously bad) to form a product that has been called lumi-LSD, which is totally inactive in man. Oh yes, and often overlooked, there may be only an infinitesimal amount of chlorine in treated tap water, but then there is only an infinitesimal amount of LSD in a typical LSD solution. And since chlorine will destroy LSD on contact, the dissolving of LSD in tap water is not appropriate.

There are many synthetic methods developed and reported for the preparation of LSD. All of them start with lysergic acid, and for that reason, it has been listed as a Schedule III controlled drug, as a depressant, under Federal law. The amide lysergamide, a component of several varieties of Morning glory seed, is also a controlled drug and, by law, a depressant.

The extraction procedure of Ergotamine from tablets is the same as in
this method.

Equipment and glassware: View attachment 4051

Reagents:

  • Ergotamine tartrate (ET) 10 g;
  • Potassium hydroxide solution (KOH) 6.7 g in 100 mL H2O;
  • Sulfuric acid ~100 mL 2.5 N (H2SO4);
  • Diethyl ether (Et2O) ~200 mL;
  • Ammonia (NH3) anhydrous ethanol solution 50 mL 15%;
  • Aqueous ammonia (NH4OH) 50 mL of 1% + 200 mL 1 N;
  • Diethylamine (Et2N) 7.1 g;
  • Chloroform (CHCl3) ~350 mL;
  • Phosphoryl chloride (POCl3) 3.4 g;
  • Magnesium sulphate (MgSO4) anhydrous ~100 g;
  • Hexane ~200 mL;
  • Dry methanol (MeOH) ~100 mL;
  • Dry d-Tartaric acid (0.232 g per 1 g of LSD base);
  • Distilled water ~ 500 mL.
9,10-Didehydro-N,N-diethyl-6-methylergoline-8β-carboxamide tartrate:
Boiling Point: N/A;
Melting Point: 200 °C;
Molecular Weight: 473.5 g/mole;
Density: N/A;
CAS Number: 17676-08-3.

Procedure

d-Lysergic acid hydrate
A solution of 6.7 g KOH in 100 mL H2O, under an inert atmosphere and magnetically stirred, was brought to 75 °C, and 10 g ergotamine tartrate (ET) (1) added in 500 mL round bottom flask. The reaction mixture turned yellow as the ergotamine went into solution over the course of 1 h. The stirring was continued for an additional 3 h. The reaction mixture was cooled to about 10 °C with an external ice bath, and acidified to a pH of about 3.0 by the dropwise addition of 2.5 N H2SO4. White solids started to appear early in the neutralization; approximately 60 mL of sulfuric acid (H2SO4) was required. The reaction mixture was cooled overnight, the solids removed by filtration, and the filter cake washed with 10 mL Et2O. The dry solids were transferred to a beaker, suspended in 50 mL 15% ammonia in anhydrous ethanol, stirred for 1 h, and separated by decantation. This extraction was repeated, and the original decantation and the second extract combined and filtered to remove a few hundred milligrams of unwanted solids. The clear filtrate was stripped of solvent under vacuum, the residual solids dissolved in 50 mL of 1% aqueous ammonia, and this solution was acidified as before with 2.5 N H2SO4. The precipitated solids were removed by filtration and washed with Et2O until free of color. After drying under vacuum to a constant weight, there was obtained 3.5 g of d-lysergic acid hydrate (2), which should be stored in a dark, sealed container.

Lysergic acid diethylamide (LSD) free-base
A suspension of 3.15 g d-lysergic acid hydrate (2) and 7.1 g of diethylamine in 150 mL CHCl3 was brought to reflux with stirring. With the external heating removed, there was added 3.4 g POCl3 over the course of 2 min, at a rate sufficient to maintain refluxing conditions. The mixture was held at reflux for an additional 5 min, at which point everything had gone into solution. After returning to room temperature, the solution was added to 200 mL of 1 N NH4OH. The phases were separated, the organic phase dried over anhydrous MgSO4, filtered, and the solvent removed under vacuum. The residue was chromatographed over alumina with elution employing a 3:1 C6H6/CHCl3 mixture, and the collected fraction stripped of solvent under hard vacuum to a constant weight. This free-base solid (3) can be recrystallized from benzene to give white crystals with a melting point of 87-92 °C.

Lysergic acid diethylamide (LSD) tartrate
This base was dissolved in warm, dry MeOH, using 4 mL per 1 g of product. There was then added dry d-tartaric acid (0.232 g per 1 g of LSD base), and the clear warm solution treated with Et2O dropwise until the cloudiness did not dispel on continued stirring (use 100 mL RBF in this case). This opaqueness set to a fine crystalline suspension (this is achieved more quickly with seeding) and the solution allowed to crystallize overnight in the refrigerator. Ambient light should be severely restricted during these procedures. The product was removed by filtration, washed sparingly with cold methanol, with a cold 1:1 MeOH/Et2O mixture, and then dried to constant weight. The white crystalline product was lysergic acid diethylamide tartrate with two molecules of methanol of crystallization, with an m.p. of about 200 °C with decomposition, and weighed 3.11 g (66%).
Repeated recrystallizations from methanol produced a product that became progressively less soluble, and eventually virtually insoluble, as the purity increased. A totally pure salt, when dry and when shaken in the dark, will emit small flashes of white light.

Medicines containing Ergotamine View attachment 4052

There is the list of medicine which are containing Ergotamine:
  • Brand names: Belcomp-PB, Cafatine PB, Micomp-PB, Ergocomp-PB
  • Contain: Belladonna/caffeine/ergotamine/pentobarbital systemic

  • Brand names: Bellergal-S, Spastrin, Eperbel-S, Bellamor
  • Contain: Belladonna/ergotamine/phenobarbital

  • Brand names: Cafergot, Cafetrate, Wigraine, Ercaf
  • Contain: Caffeine/ergotamine systemic

There are many different medicines that contain ergotamine. You can search on Amazon or other search resource in your country.
G.PattonBoss I buy a LSD solution, 100mg in 5ml of vodka and i want to store indefinitely. Have some questions..
-Is better in the freezer or in the fridge?
-Is neccesary to bubble argon or nitrogen to the solution and fill the empty top part of the dropper with the inert gas or vaseline or something like that?
-Put a few mg of EDTA?

Thanks!!!

I want to store for years.
 

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,387
Solutions
3
Reaction score
2,327
Points
113
Deals
1
Boss I buy a LSD solution, 100mg in 5ml of vodka and i want to store indefinitely. Have some questions..
-Is better in the freezer or in the fridge?
-Is neccesary to bubble argon or nitrogen to the solution and fill the empty top part of the dropper with the inert gas or vaseline or something like that?
-Put a few mg of EDTA?

Thanks!!!

I want to store for years.
MacondorKeep receptacle tightly sealed. Store in cool (use -17-20 *C freezer), dry conditions in well sealed receptacles.
 

Macondor

Don't buy from me
Resident
Joined
May 14, 2023
Messages
29
Reaction score
5
Points
3
Keep receptacle tightly sealed. Store in cool (use -17-20 *C freezer), dry conditions in well sealed receptacles.
G.Pattonthanks man, so is not neccesary do anything of what i described?
The vodka solution hermetic in the freezer and nothing more?
If in the droper have a a little space with air because is not full is not a problem?

love
 
Last edited:

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,387
Solutions
3
Reaction score
2,327
Points
113
Deals
1
thanks man, so is not neccesary do anything of what i described?
The vodka solution hermetic in the freezer and nothing more?
If in the droper have a a little space with air because is not full is not a problem?

love
Macondor
so is not neccesary do anything of what i described?
The vodka solution hermetic in the freezer and nothing more?
If in the droper have a a little space with air because is not full is not a problem?
I think it would be enough.
 
  • Free product samples

    Testing products from new vendors and manufacturers.

    Get free samples for testing now!

  • Always stay in touch with BB forum. Element/Matrix.

    Connect notifications to always stay in touch with the forum!

    Connect

  • The BB Forum team is looking for cooperation:

    • Traffic arbitrage specialists
    • Spammers
    • Advertising agencies
    • Bloggers/Vloggers
    • TOR sites directories
    • Creative people who can create viral content
    • Administrators of Telegram Channels and Groups

      We will pay more for your traffic than our competitors! $0.1 per visitor!!!If you are interested in, write to the administrator.
Top