MDMA/ecstasy purification method

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,503
Solutions
3
Reaction score
2,535
Points
113
Deals
1

Introduction.

As all of us know, ecstasy pills can be admixtured by enormous number of drugs and adulterants. In the ecstasy assessment protocol which I've described, you may familiarize with them.
So to begin with some background information on MDMA purity. The crystal form of MDMA that we all know is MDMA.hcl (i.e. it's a salt of MDMA). A common misconception that I see around forums is that if it's brown and smells like aniseed/liquorice, then it is pure MDMA - This is incorrect, as pure MDMA*HCl is an odorless white transparent crystal. This brown appearance and sometimes oily texture, coupled with the distinctive aniseed like smell, are actually precursors and by-products that have not been cleaned off after the synthesis. I won't go into details as to what they are but some, such as safrole, are potential carcinogens whilst others have unknown activity but, either way, it's probably not a good idea to be ingesting them. Another problem that this causes is that these impurities can make up a significant proportion by weight of the sample (up to 50% impurities!) and so skew what people consider to be a good dose. As the level of impurities will vary from sample to sample, the ability to be able to consistently know a good dose for yourself becomes impaired which of course is very problematic in terms of safety and having a satisfying effect.
The described below process will rid your drugs of impurities and cuts such as caffeine, dye, and other pesky contaminants. It should be clear that this process is to separate the polar material from the non-polar material. If there are polar adulterants along with your MDMA (other amphetamines for example) they will remain with the cleaned MDMA. While it's useful for inactives and caffeine, it does not mean you're off the hook from having to test it. That being said, if you have washed and tested MDMA you can be as certain of your dose as anyone possibly could be (short of lab testing, of course). Also, this process works for extracting MDMA out of ecstasy tablets.​

The Actual acetone wash is very straightforward after doing this:

For the acetone wash, you will need:
  • Pure acetone (crucially not mixed with water or anything else like in some nail polish removers) - This can be bought easily and cheaply on amazon without suspicion.
  • Epsom salts - These are hydrous magnesium sulphate crystals and can be bought easily and cheaply from your local chemist such as boots (I will explain further down why these are necessary)​
  • A smallish beaker (50 ml is good) but if that is not available then a regular kitchen glass can be utilized (a short and thin in diameter glass is good)​
  • Filter paper (coffee filter paper is also fine for this)​
  • something to stir the mixture with (glass rod ideally but a chopstick or metal knife is fine, just make sure if your knife has a plastic handle it doesn't come into contact with the acetone)​

Procedure of purification.

Firstly, you need to make anhydrous acetone [caution: acetone is extremely flammable, so keep away from sources of ignition]. MDMA is very soluble in water and acetone is hygroscopic, meaning that it attracts water. You will lose a very large quantity of your sample if your acetone is not anhydrous before use. This is where the Epsom salts come in: first, you bake your Epsom salts (you will want to use a fairly large quantity) in the oven at 200-250 degrees centigrade for 2-3 hours. This will yield a dusty white powder which is anhydrous magnesium sulfate. Next you just add the anhydrous magnesium sulfate you have made to your acetone until a snow-globe type of effect happens when you swirl the liquid around (the presence of free-flowing magnesium sulfate indicates the acetone is dry, when there is water in your acetone the magnesium sulfate will clump together and sink to the bottom of the solution). After you reach this point, give the acetone a good shake and chill in the freezer for a few hours before use. This should ensure that it's dry for use.​

Important.
Over time, anhydrous acetone will absorb moisture from the air. It's pretty much inevitable, but you can always add more magnesium to make it right again. Never leave the acetone exposed to the air. Keep the jar, filter and bottle covered as much as possible.

Step 1: Crush your MDMA/ecstasy tablet to dust - same procedure as if you were going to take a line of it, the finer you crush it the better the acetone wash will work to remove impurities. Here is a photo of my sample to give you an idea of how fine it should be.​
18EwUDBWTV
3PbrIQwN9L
The sample shown here has been reagent tested and purity tested by the EZ semi-quantitative kit and is of about 60-70% purity, it feels a little oily and has a very strong aniseed smell.

Step 2: Pour MDMA into a beaker/glass, then pour in the anhydrous acetone that you made earlier. Use an amount that will give you a decent head of solvent that can be decanted off without pouring out your MDMA as well. Stir vigorously for two minutes and leave to settle until the residue will be obtained (you can gently tap the side of the beaker/glass to speed this up). You should now have the MDMA sunk to the bottom and a layer of discolored acetone at the top containing the impurities as shown here.​
SPZiuYBqXj
Now decant off the dirty acetone carefully without pouring out the MDMA with it (this part is made easier by a pipette, but is not necessary). Repeat this step until the acetone on the top layer stays clear (usually about 3-5 washes).​
Hi4lmqxz13
Step 3: Filter the MDMA out of the acetone using filter paper. Fold your filter paper into 4 times and then pop it out in to a cone shape (3 of the folds will be on 1 side and 1 on the other side), then pour your mixture through the paper. The easiest way to do this is, to stir the solution, so the crystals are flowing around with acetone then quickly pouring the mixture into the filter paper, this makes it easier to get the MDMA out of the beaker without having to scrape it off. Any remaining MDMA in the beaker can be mobilized like this using a small volume of acetone and is then poured into the filter paper. Make sure the filter paper is either held stable by you or a filter funnel while pouring! You cannot drop the filter paper accidentially and loose all your hard work.​
WJajEu4pVP
Step 4: Dry your crystals. Acetone is very volatile (evaporates easily) so this can be done easily using a hairdryer. Simply wrap up your crystals in the filter paper, so there are nowhere the crystals can be blown out from, and dry using a hair dryer till the paper and crystals inside are dry to the touch and don't smell of acetone. If you are going to recrystallize with isopropanol afterwards, your crystals do not need to be fully dry. Also, if you don't have a hairdryer, you can dry your sample in the oven at a low temperature (50-60 degrees centigrade).

That's it, you are all done! This procedure can be used to wash other substances such as cocaine and mescaline and to extract the MDMA out of pills. This is what my sample looked like after the acetone washes. It would be brighter, but it was still wet at this stage. You can continue to recrystallize your stuff, or end up there. Now wait 24 hours, or until all the acetone has evaporated from the dish and crystals. Once the smell is gone, you're good to go.​
8ozwYb0l3E

Recrystallization Using Isopropanol:

In order to attempt this, it's advisable to understand how this works. Recrystallization works by dissolving your sample in hot (near boiling) solvent (isopropanol in this case) as solubility increases with temperature. This allows you to dissolve all of your sample in a relatively small amount of solvent (1g of MDMA will dissolve easily in 10 ml of hot isopropanol). Now all of your sample, including the impurities that were trapped inside the crystal, are now in solution. This is why it is better than an acetone wash as no matter how finely you grind the crystals up there will always be some impurities trapped in the crystals that the acetone cannot remove. Also, as you are heating up the isopropanol, some harder to dissolve impurities will be soluble in it. Then allow the heated solution to cool as slowly as possible. The pure MDMA crystals will start to precipitate out from the solution when the temperature decreases. This is because the MDMA is less soluble in cold isopropanol. By doing this slowly, it allows the MDMA crystals to form whilst the impurities stay dissolved in the isopropanol (along with a small amount of MDMA crystals). By cooling the solution too fast (i.e. putting it immediately in the freezer after dissolving your sample in the isopropanol) other impurities crash back out of the solution along with the MDMA, so the product is not as pure, also the crystals that form will be smaller and not as pretty as a result of the lower purity.​

What you will need:

  • 2 glass beakers (50ml is again a good size for these), unfortunately since the isopropanol needs to be heated, I cannot recommend using a normal glass to heat up the solvent as it could shatter. Fortunately, you can buy these very cheaply and without suspicion from Amazon.​
  • Pure isopropanol (99% or above) again must not be diluted with other chemicals or water. Again, this can be bought easily and cheaply from Amazon.​
  • Filter papers (again, coffee filter paper is fine)​
  • Anhydrous Magnesium sulfate (the same stuff used to make the acetone anhydrous in the previous step)​
  • Anhydrous acetone (optional)​
  • Stirrer (wooden chopstick is fine)​
  • Glass pipette (optional)​
Overview:
  1. Heat anhydrous isopropanol till it just starts to boil.​
  2. Use minimum amount of hot isopropanol possible to dissolve MDMA in.​
  3. Allow isopropanol solution to cool slowly to form pure MDMA crystals.​
  4. Recover extra MDMA from dirty isopropanol, then filter and dry samples.​

How to carry out procedure.

Step 1: Pour some isopropanol into a glass beaker. It's better to use more than you need, as you will be heating it and some will evaporate. For 10 g's of MDMA use around 30 ml to dissolve it but heated up 40 ml. Then you can stack a saucepan on the surface of a frying pan over the hob to heat up the isopropanol. Isopropanol is also extremely flammable, so should never be directly exposed to the flame from the hob. By using the set-up of the saucepan on top of a frying pan, the isopropanol is buffered from the flame directly, so the risk of it igniting is minimal. Place the beaker of isopropanol onto the saucepan and heat it up to when it just starts to boil. Use the extractor hood above your hob if you have one during this, if not at least open a window to help ventilate the room better.

Step 2: Get your beaker containing your MDMA crystals ready. Now, once the isopropanol has just reached boiling, pour in a small volume into the beaker containing your MDMA (not the whole volume you planned to use). The top of the beaker should be cool enough to touch as long as the beaker is not completely full, but you can use insulating gloves/cloth if you prefer. Swirl the isopropanol around to mix it with the MDMA. Now place the Beaker with your MDMA and isopropanol onto the saucepan as we'll to keep it hot. Keep adding small amounts of hot isopropanol to your MDMA until it just dissolves. Let me repeat this in clearer words: you want to add the smallest volume of isopropanol possible to dissolve the MDMA, if you add too much isopropanol the MDMA will not precipitate from the solution once you cool it down or if it does your yield will be very poor. If you accidentally add too much, you can boil some off to reduce the volume once the MDMA has all been dissolved. Keep swirling/stirring the solution with the MDMA in it whilst adding isopropanol to help it dissolve. Once everything is dissolved, you should be left with a discolored solution with everything dissolved that looks similar to this picture.​
index.php
As you can see, even after acetone washing my sample, there were still lots of the brown colored impurities that have dissolved into the isopropanol.

Note 1: If there are impurities that are insoluble in isopropanol, for instance, if your sample is contaminated with table salt or talcum powder, they won't dissolve in the isopropanol at all. They will be left over once all the MDMA and other impurities have dissolved, and you can simply filter the solution using filter paper to remove them and then let the solution cool down as normal.​
Note 2: From the image above, you can see that I am using just a frying pan to heat the isopropanol and not a saucepan in a frying pan. This is quicker to heat up the isopropanol, but also carries more risk of ignition and overboiling your solvent. I do this because I have lots of experience handling chemicals in a lab, I would recommend that someone with little to no experience with lab work/handling solvents use the set-up I suggested.

Step 3: Once everything has dissolved, turn off the hob and allow the solution to cool on the saucepan, this will ensure that it cools down slowly. Once it reaches room temperature, you can put it in the freezer to allow the crystals to fully form. If you have added a minimal volume of the isopropanol after leaving the beaker in the freezer for 20-30 mins, the crystals should be forming pretty obviously. Sometimes the crystals start to precipitate out once the solution has reached room temperature, this is also okay. As I said before, the slower you cool it, the purer the crystals are. Some people will leave the beaker at room temperature overnight then leave it in the fridge for 4 hours, then in the freezer overnight to obtain incredibly pure and large crystals. Personally, I find this to be excessive and have achieved excellent results with leaving the beaker to cool down for one hour to room temperature, then to leave it in the freezer for 2-3 hours. Occasionally, crystallization has to be induced once the sample has cooled down. If you think you have used the right volume of isopropanol to dissolve your MDMA, but after cooling down in the freezer no crystals have appeared, you can scratch the bottom of the beaker with something like a glass rod or a metal fork. This will often induce crystallization, and the crystals will start to appear right before your eyes. When successfully done, you will have a beaker containing your crystals at the bottom and a head of excess discolored isopropanol at the top, which you will want to keep. This is what my MDMA looked like once I had poured off the dirty isopropanol.​
YesX2ptnKN
If you do not have anhydrous acetone available, then you will want to keep the dirty isopropanol in a beaker with your MDMA, then dislodge the crystals from the bottom of the beaker using a chopstick or metal knife, swirl the mixture to mobilize crystals and then pour into a filter paper to collect your MDMA crystals and keep the dirty isopropanol in another beaker. If you have anhydrous acetone, then you can simply pour off the dirty isopropanol into another beaker and use the acetone to help dislodge the crystals, and then pour the mixture through a filter. This is my batch whilst being filtered.​
GceQPVTOHU
The MDMA you have collected in the filter paper is now very close to 100% pure, I have achieved purifies of greater than 95% with this method. It can now be dried in the same way using a hairdryer as described earlier. If you have used acetone to help get the MDMA out of the beaker, it will be quicker to dry than if you have just poured the MDMA out with the dirty isopropanol.

Step 4: This is not compulsory, but is highly advised to improve your yield.
In the dirty isopropanol you have collected. There is still some MDMA. This can be extracted by boiling off the dirty isopropanol until there is only a tiny volume left (approximately 5 ml). Then you just let it cool down slowly again to allow the MDMA to precipitate from the dirty isopropanol. This will be a smaller but still significant amount of product. From the batch I have shown, there was around a whole gram extracted from the dirty isopropanol. The MDMA formed from this will not be as pure as the main batch of crystals but will still be very pure compared to the starting product. You can separate the crystals from the dirty isopropanol the same way as described above.

The beaker on the right is the purest main batch and on the left is the recovered batch.​
EAzljIBFyd
Here is the result of the EZ purity test for the purified batch. It corresponds to the color in the bottom-right corner of the chart, which indicates a similar purity to a 100% pure sample of MDMA.​
XNpa5JL09F
You have just made some near 100% pure MDMA. Here is what the batch looked like after all manipulations.​
VRBf4Cw3lN
 

Attachments

  • zDvQAKfmp4.jpg
    zDvQAKfmp4.jpg
    35.7 KB · Views: 3,879
Last edited by a moderator:

Zeniall

Don't buy from me
New Member
Joined
Oct 27, 2021
Messages
1
Reaction score
1
Points
3
Thanks, I'll try to do it!
 

Hans-Dietrich

Don't buy from me
New Member
Joined
Dec 4, 2021
Messages
47
Reaction score
41
Points
18
Thanks, good job. The acetone (IPA same way) remaining from rinsing must be saved and placed in the freezer. Get a small bonus in a few days.
 

Nayvadius

Don't buy from me
New Member
Joined
Jan 10, 2022
Messages
3
Reaction score
0
Points
1
Would this take impure products, like amphetamine sulfate paste, methamphetamine crystals, MDMA, etc., and basically make them "pharmaceutical-grade" so to speak? My thinking is that so long as what you have does indeed contain the substance at all, it should turn it out to be no different than what one could be prescribed.
 

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,503
Solutions
3
Reaction score
2,535
Points
113
Deals
1
Would this take impure products, like amphetamine sulfate paste, methamphetamine crystals, MDMA, etc., and basically make them "pharmaceutical-grade" so to speak? My thinking is that so long as what you have does indeed contain the substance at all, it should turn it out to be no different than what one could be prescribed.
NayvadiusNo, it won't. For instance, in your MDMA contain amph or meth, it will stay there after purification.
 
Last edited:

Nayvadius

Don't buy from me
New Member
Joined
Jan 10, 2022
Messages
3
Reaction score
0
Points
1
No, in won't. For instance, in your MDMA contain amph or meth, it will stay there after purification.
G.PattonIf one wanted to safely consume the purest methamphetamine possible outside of sourcing Desoxyn from a pharmacy, would this process be the next best thing if taken orally? creating myself is not an option
 

WillD

Expert
Joined
Jul 19, 2021
Messages
671
Reaction score
953
Points
93
Desoxyn tablets contain corn starch, lactose, sodium paraminobenzoate, stearic acid and talc. It is quite difficult to find solvents for complete clean, but if there is a lot of the drug, we can try to do it.
 

Nayvadius

Don't buy from me
New Member
Joined
Jan 10, 2022
Messages
3
Reaction score
0
Points
1
Desoxyn tablets contain corn starch, lactose, sodium paraminobenzoate, stearic acid and talc. It is quite difficult to find solvents for complete clean, but if there is a lot of the drug, we can try to do it.
William Dampierhell yeah ill try it will you also try and share your results thanks :)
 

JuanoImano4378

Don't buy from me
New Member
Joined
Dec 14, 2022
Messages
17
Reaction score
1
Points
3
Can I follow the same procedure for purifying crystal meth that is covered in a layer of oil?
 

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,503
Solutions
3
Reaction score
2,535
Points
113
Deals
1

Mr Good Cat

Don't buy from me
Resident
Joined
Jan 6, 2023
Messages
281
Reaction score
111
Points
43
Thanks. I shall try this method as well.
 

Mr Good Cat

Don't buy from me
Resident
Joined
Jan 6, 2023
Messages
281
Reaction score
111
Points
43
I read in some sources that adding sodium carbonate to the solution is good if an emulsion formed. Sodium carbonate reduces the solubility of water, so the free base is separated of water.
Has anybody tried this way?
 

Mr Good Cat

Don't buy from me
Resident
Joined
Jan 6, 2023
Messages
281
Reaction score
111
Points
43
I had some relatively small amount of MDMA HCl made from the freebase left for the overnight in the beaker. So the color was obviously slighty brownish or yellowish, whatever, but far away from the desirable color, even the tests shown purity around 95. Crystallization of oversaturated water solution didn't bring any result, as well as acetone. So I decided to make an attempt with IPA as the last resort.

The report about result will come later. But I can say now, the volume of IPA mentioned by noble @G.Patton is quite excessive. I had 22 gr, so I started with 80 ml of IPA. Then, as it started boiling - 82.6C, I removed some volume down to 60 ml, and slowly added the salt. It dissolved completely without any difficulty. So I kept it on the hotplate for a while.

At the ending, as I was able to see powder rising in the beaker (but it could be some insoluble impurities as well) total volume was 71 ml. The salt itself shall take 22.0/ 1.1 = 20 ml. So IPA volume shall be 71 - 20 = 51 ml, that means 1 ml of hot boiling IPA solves at least 0.43 gr of MDMA HCl or even more, let's see.

IPA purity is >99.5.

Might be, it is better to start with 20 ml of IP per 10 gr of MDMA?

M3pXx9ZyOR
 
Last edited:
View previous replies…

w2x3f5

Don't buy from me
Resident
Joined
Jan 15, 2023
Messages
351
Reaction score
166
Points
43
I had some relatively small amount of MDMA HCl made from the freebase left for the overnight in the beaker. So the color was obviously slighty brownish or yellowish, whatever, but far away from the desirable color, even the tests shown purity around 95. Crystallization of oversaturated water solution didn't bring any result, as well as acetone. So I decided to make an attempt with IPA as the last resort.

The report about result will come later. But I can say now, the volume of IPA mentioned by noble @G.Patton is quite excessive. I had 22 gr, so I started with 80 ml of IPA. Then, as it started boiling - 82.6C, I removed some volume down to 60 ml, and slowly added the salt. It dissolved completely without any difficulty. So I kept it on the hotplate for a while.

At the ending, as I was able to see powder rising in the beaker (but it could be some insoluble impurities as well) total volume was 71 ml. The salt itself shall take 22.0/ 1.1 = 20 ml. So IPA volume shall be 71 - 20 = 51 ml, that means 1 ml of hot boiling IPA solves at least 0.43 gr of MDMA HCl or even more, let's see.

IPA purity is >99.5.

Might be, it is better to start with 20 ml of IP per 10 gr of MDMA?

View attachment 13075
Policja Polskawhy chloride? there are other amine salts through which the product can be well purified and then converted into hydrochloride
 

Mr Good Cat

Don't buy from me
Resident
Joined
Jan 6, 2023
Messages
281
Reaction score
111
Points
43
why chloride? there are other amine salts through which the product can be well purified and then converted into hydrochloride
w2x3f5actually I didn't expect one night in the beaker will harm the freebase.
do you mean - acidify the freebase with H2SO4, then do ABE with HCl?
 

w2x3f5

Don't buy from me
Resident
Joined
Jan 15, 2023
Messages
351
Reaction score
166
Points
43
actually I didn't expect one night in the beaker will harm the freebase.
do you mean - acidify the freebase with H2SO4, then do ABE with HCl?
Policja Polskamake oxalate in alcohol, amine oxalates usually crystallize well and are very poorly soluble substances, then it is possible to wash out impurities. Try it on a small amount of the substance! Perhaps the best option is to distill the free base in low vacuum with separate collection of distillate by fractions (spider type nozzle or use Anstutz-Tile)
 

Mr Good Cat

Don't buy from me
Resident
Joined
Jan 6, 2023
Messages
281
Reaction score
111
Points
43
I had some relatively small amount of MDMA HCl made from the freebase left for the overnight in the beaker. So the color was obviously slighty brownish or yellowish, whatever, but far away from the desirable color, even the tests shown purity around 95. Crystallization of oversaturated water solution didn't bring any result, as well as acetone. So I decided to make an attempt with IPA as the last resort.

The report about result will come later. But I can say now, the volume of IPA mentioned by noble @G.Patton is quite excessive. I had 22 gr, so I started with 80 ml of IPA. Then, as it started boiling - 82.6C, I removed some volume down to 60 ml, and slowly added the salt. It dissolved completely without any difficulty. So I kept it on the hotplate for a while.

At the ending, as I was able to see powder rising in the beaker (but it could be some insoluble impurities as well) total volume was 71 ml. The salt itself shall take 22.0/ 1.1 = 20 ml. So IPA volume shall be 71 - 20 = 51 ml, that means 1 ml of hot boiling IPA solves at least 0.43 gr of MDMA HCl or even more, let's see.

IPA purity is >99.5.

Might be, it is better to start with 20 ml of IP per 10 gr of MDMA?

View attachment 13075
Policja Polskaprobably my hands are growing out of my ass. i did as i described above, coolled the beaker down to RT, and put it in the freezer for 2 hours. then, all I see, the whole RM is completely frozen piece of ice. is there any suggestion what to do? repeat the procedure with additional IPA in the RM?

MStTcfsiEg
 
View previous replies…

w2x3f5

Don't buy from me
Resident
Joined
Jan 15, 2023
Messages
351
Reaction score
166
Points
43
probably my hands are growing out of my ass. i did as i described above, coolled the beaker down to RT, and put it in the freezer for 2 hours. then, all I see, the whole RM is completely frozen piece of ice. is there any suggestion what to do? repeat the procedure with additional IPA in the RM?

View attachment 13077
Policja Polskacolor good
 

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,503
Solutions
3
Reaction score
2,535
Points
113
Deals
1
yes, I have a feeling that the salt precipitates too quickly. may be, it could be right to leave the beaker on RT for 5-8 hour to see what is going on.
Policja PolskaIt is better to cool it down as slowly as possible at room temperature without any shaking in order to growth the crystals.
 

HerrHaber

Don't buy from me
Resident
Joined
Jan 15, 2023
Messages
465
Reaction score
241
Points
43
I had some relatively small amount of MDMA HCl made from the freebase left for the overnight in the beaker. So the color was obviously slighty brownish or yellowish, whatever, but far away from the desirable color, even the tests shown purity around 95. Crystallization of oversaturated water solution didn't bring any result, as well as acetone. So I decided to make an attempt with IPA as the last resort.

The report about result will come later. But I can say now, the volume of IPA mentioned by noble @G.Patton is quite excessive. I had 22 gr, so I started with 80 ml of IPA. Then, as it started boiling - 82.6C, I removed some volume down to 60 ml, and slowly added the salt. It dissolved completely without any difficulty. So I kept it on the hotplate for a while.

At the ending, as I was able to see powder rising in the beaker (but it could be some insoluble impurities as well) total volume was 71 ml. The salt itself shall take 22.0/ 1.1 = 20 ml. So IPA volume shall be 71 - 20 = 51 ml, that means 1 ml of hot boiling IPA solves at least 0.43 gr of MDMA HCl or even more, let's see.

IPA purity is >99.5.

Might be, it is better to start with 20 ml of IP per 10 gr of MDMA?

View attachment 13075
Policja Polskadon't worry bro it's all there until you throw something away
 
  • Free product samples

    Testing products from new vendors and manufacturers.

    Get free samples for testing now!

  • Always stay in touch with BB forum. Element/Matrix.

    Connect notifications to always stay in touch with the forum!

    Connect

Top