Hello,
First of all, I would like to point out that I had to use a translator, and you have incredible knowledge on these topics, respect to you
A friend of mine makes his product from a recipe he has, it is a "homemade" and simple process. He calculates the proportions from a recipe he knows, which I personally do not like, hence this post. I have Marquis liquid reagent and they always changed the sample of the finished product to orange, according to the Aderal list something like that.
This is how it looks for him in short.
Bucket -> Anhydrous caffeine -> A-Oil (free base) -> Sulfuric acid - I mix everything all the time, carefully with a mixer and after a while nice white balls start to come out. (like Popcorn).
He has/buys a-oil - free amphetamine, the last batch he bought had a transparent color, pH about 11-12. What should be the correct pH and how much should 1 ml of free base weigh?
He once bought one that was whiskey colored, but all the reactions were the same, but it didn't have pH indicators, it wasn't until I was there once and saw it that I immediately told him to check everything with its pH level.
The sulfuric acid I have is about 30%.
My idea that I would like to make is pure amphetamine sulfate without any fillers (caffeine), from this oil, but I would like to make sure / find out if this method will work as I intended.
Questions for you:
1. I pour 15 ml of liquid amphetamine base into a glass container, stirring drop by drop I pour sulfuric acid with each drop I add I measure the pH, when I reach the pH limit of 6.5 I stir for a few more minutes, I set the container aside to dry to a white powder. Then I take the product and rinse it through a coffee filter with acetone (the manufacturer wrote in the product description that it consists of 100% acetone), so I came to the conclusion that it is anhydrous and bought such a 100 ml bottle. After drying again and collecting the white substance from the coffee filter, will it be pure amphetamine sulfate?
2. The oil that buys and produces the product never mixes it with anything as it is, pours it into the "pot and cooks", my question is, is this the correct method, does it not affect anything, e.g. the speed power, or quite the opposite??
3. When I do my idea, should I do it with pure oil, or is it better to add IPA or acetone in the right amount of course?? I wanted to do it with pure oil.
4. Should I put the acid and oil in the freezer before "cooking", or does it not matter at all??
5. Hypothetically, let's assume that everything has been done, we have reached pH 6.5, should we rinse it with acetone immediately or only when it turns into a white powder in the glass container? and should we leave it to dry normally in the air in the room or put it in the fridge or freezer, for example.
thanks in advance for all answers and tips
First of all, I would like to point out that I had to use a translator, and you have incredible knowledge on these topics, respect to you
A friend of mine makes his product from a recipe he has, it is a "homemade" and simple process. He calculates the proportions from a recipe he knows, which I personally do not like, hence this post. I have Marquis liquid reagent and they always changed the sample of the finished product to orange, according to the Aderal list something like that.
This is how it looks for him in short.
Bucket -> Anhydrous caffeine -> A-Oil (free base) -> Sulfuric acid - I mix everything all the time, carefully with a mixer and after a while nice white balls start to come out. (like Popcorn).
He has/buys a-oil - free amphetamine, the last batch he bought had a transparent color, pH about 11-12. What should be the correct pH and how much should 1 ml of free base weigh?
He once bought one that was whiskey colored, but all the reactions were the same, but it didn't have pH indicators, it wasn't until I was there once and saw it that I immediately told him to check everything with its pH level.
The sulfuric acid I have is about 30%.
My idea that I would like to make is pure amphetamine sulfate without any fillers (caffeine), from this oil, but I would like to make sure / find out if this method will work as I intended.
Questions for you:
1. I pour 15 ml of liquid amphetamine base into a glass container, stirring drop by drop I pour sulfuric acid with each drop I add I measure the pH, when I reach the pH limit of 6.5 I stir for a few more minutes, I set the container aside to dry to a white powder. Then I take the product and rinse it through a coffee filter with acetone (the manufacturer wrote in the product description that it consists of 100% acetone), so I came to the conclusion that it is anhydrous and bought such a 100 ml bottle. After drying again and collecting the white substance from the coffee filter, will it be pure amphetamine sulfate?
2. The oil that buys and produces the product never mixes it with anything as it is, pours it into the "pot and cooks", my question is, is this the correct method, does it not affect anything, e.g. the speed power, or quite the opposite??
3. When I do my idea, should I do it with pure oil, or is it better to add IPA or acetone in the right amount of course?? I wanted to do it with pure oil.
4. Should I put the acid and oil in the freezer before "cooking", or does it not matter at all??
5. Hypothetically, let's assume that everything has been done, we have reached pH 6.5, should we rinse it with acetone immediately or only when it turns into a white powder in the glass container? and should we leave it to dry normally in the air in the room or put it in the fridge or freezer, for example.
thanks in advance for all answers and tips
