Everything I learned these days about methamphetamine (correct me if I got it wrong, I'm still learning)

[Gusfring666]

Dilute hydrochloric acid–> This can be purchased at a hardware store. He It is sold as a block and sidewalk cleaner. They call it acid Muriatic.

Sodium hydroxide–> This one, you probably already have. It's called "soda" caustic" or bleach in most places; is sink cleaner and Drains.

Ethyl ether–> You'll probably have to manufacture. Don't worry, it's a Soft. Just go to your local grocery store or auto parts store and pick up A can of that "starting fluid" that comes in spray. It is used for cold start of gasoline engines.


Nasal inhaler "VICK"–> No other will work, until where I know about. They are in any drugstore or grocery store, etc. You You'll need about 12 of them, but don't buy a dozen like that unless It's winter, so you'll be able to say it's for your infirmary, which is stocking up for patients. Otherwise, buy two at a time, if possible. Call a friend to help you. The pharmacists of the drugstore they'll usually know what's going on if you buy big quantity.



The list of equipment I will post later, correct me any mistakes in this post, please, I am learning a lot from you, I loved the forum, @Berlin777 helped me a lot, welcomed me, I felt comfortable here

 

[Gordon Ramsay]

Is your main target to obtain most of the chemicals OTC (OTC=Over The Coutner)? If not you could purchase those chemicals from a supplier directly and save time

Have fun learning and welcome to the forum!

 

[Gusfring666]

Is your main target to obtain most of the chemicals OTC (OTC=Over The Coutner)? If not you could purchase those chemicals from a supplier directly and save time

Have fun learning and welcome to the forum!

Gordon RamsaySo would it be better for me to buy directly from a supplier?

Thanks, I'm really enjoying the forum

 

[Gordon Ramsay]

So would it be better for me to buy directly from a supplier?

Thanks, I'm really enjoying the forum

Gusfring666It always is best Nowadays you can buy even more stealth from a supplier than OTC, through the darknet.

 

[Gusfring666]

It always is best Nowadays you can buy even more stealth from a supplier than OTC, through the darknet.

Gordon RamsayIt's safer to buy here on the forum than in other places on the darknet, right? because here it seems very reliable and safe

 

[Gordon Ramsay]

It's safer to buy here on the forum than in other places on the darknet, right? because here it seems very reliable and safe

Gusfring666It depends on the vendors but this forums is one of the best places to find chemicals quickly. In general you should only buy with the escrow system the forum offers

 

[Gusfring666]

It depends on the vendors but this forums is one of the best places to find chemicals quickly. In general you should only buy with the escrow system the forum offers

Gordon RamsayI understand, thank you very much

 

[beherit]

Is your main target to obtain most of the chemicals OTC (OTC=Over The Coutner)? If not you could purchase those chemicals from a supplier directly and save time

Have fun learning and welcome to the forum!

Gordon RamsaySome countries, like ones in South America have even more strict regulations than the USA and the EU.

Thus, making the acquisition of chemicals by buying really expensive and potentially dangerous, so generally OTC is the way to go.

I commend the OP for going this far in his research for OTC products as replacement for actual chemicals.

 

[Berlin777]

Dilute hydrochloric acid–> This can be purchased at a hardware store. He It is sold as a block and sidewalk cleaner. They call it acid Muriatic.

Sodium hydroxide–> This one, you probably already have. It's called "soda" caustic" or bleach in most places; is sink cleaner and Drains.

Ethyl ether–> You'll probably have to manufacture. Don't worry, it's a Soft. Just go to your local grocery store or auto parts store and pick up A can of that "starting fluid" that comes in spray. It is used for cold start of gasoline engines.


Nasal inhaler "VICK"–> No other will work, until where I know about. They are in any drugstore or grocery store, etc. You You'll need about 12 of them, but don't buy a dozen like that unless It's winter, so you'll be able to say it's for your infirmary, which is stocking up for patients. Otherwise, buy two at a time, if possible. Call a friend to help you. The pharmacists of the drugstore they'll usually know what's going on if you buy big quantity.



The list of equipment I will post later, correct me any mistakes in this post, please, I am learning a lot from you, I loved the forum, @Berlin777 helped me a lot, welcomed me, I felt comfortable here

Gusfring666I’m glad I could help someone as I was in the same position and didn’t even know where to start because there’s too much informations to analyse for a complete newbie, I probably even was pain in the ass for some users asking shit loads of questions

 

[Gusfring666]

I’m glad I could help someone as I was in the same position and didn’t even know where to start because there’s too much informations to analyse for a complete newbie, I probably even was pain in the ass for some users asking shit loads of questions

Berlin777hahaha, I understand, I'm glad it was well received here

 

[Frit Buchner]

Ethyl acetate is available at the hardware as tsp substitute paint thinner. Sulfuric acid drain cleaner is 95% pure at the hardware. Vm&p naptha is a versatile non-polar solvent. Pure(ish) acetone can be found basically anywhere as fingernail polish remover. Chlorinated carburetor cleaner is dcm, methylene chloride. About 75%. Engine starting fluid often has Ethyl ether and or hectare or hexadecimal. Epsom salt is a good drying agent once prepared. 91% isopropyl alcohol can be salted with table salt to near anhydrous conditions. Pyrex pie pans are $3 and work good for pies and also recrystalizations

 

[Gusfring666]

Ethyl acetate is available at the hardware as tsp substitute paint thinner. Sulfuric acid drain cleaner is 95% pure at the hardware. Vm&p naptha is a versatile non-polar solvent. Pure(ish) acetone can be found basically anywhere as fingernail polish remover. Chlorinated carburetor cleaner is dcm, methylene chloride. About 75%. Engine starting fluid often has Ethyl ether and or hectare or hexadecimal. Epsom salt is a good drying agent once prepared. 91% isopropyl alcohol can be salted with table salt to near anhydrous conditions. Pyrex pie pans are $3 and work good for pies and also recrystalizations

Frit BuchnerThanks for the explanation

 

[BlueDex]

Ethyl acetate is available at the hardware as tsp substitute paint thinner. Sulfuric acid drain cleaner is 95% pure at the hardware. Vm&p naptha is a versatile non-polar solvent. Pure(ish) acetone can be found basically anywhere as fingernail polish remover. Chlorinated carburetor cleaner is dcm, methylene chloride. About 75%. Engine starting fluid often has Ethyl ether and or hectare or hexadecimal. Epsom salt is a good drying agent once prepared. 91% isopropyl alcohol can be salted with table salt to near anhydrous conditions. Pyrex pie pans are $3 and work good for pies and also recrystalizations

Frit BuchnerThe engine starting fluid has diethyl ether and either hexane or heptane. There are videos on how to make diethyl ether from ethanol. Devil Springs and Everclear has a high percentage of ethanol. There could be lab ethanol online. Dibutyl ether could be used for a Grignard reaction of ethylmagnesium chloride with acetonitrile and hydrochloric acid work-up to make P2P (Phenyl-2-Propanone).

 

[OrgUnikum]

The engine starting fluid has diethyl ether and either hexane or heptane. There are videos on how to make diethyl ether from ethanol. Devil Springs and Everclear has a high percentage of ethanol. There could be lab ethanol online. Dibutyl ether could be used for a Grignard reaction of ethylmagnesium chloride with acetonitrile and hydrochloric acid work-up to make P2P (Phenyl-2-Propanone).

BlueDexBenzylmagnesium Chloride and Acetonitrile I suppose or you are missing the aromatic ring. Although if you get it working tell me how, I then tell you how to make Amphetamine from the intermediate directly without going though P2P

 

[OrgUnikum]

Benzylmagnesium Chloride and Acetonitrile I suppose or you are missing the aromatic ring. Although if you get it working tell me how, I then tell you how to make Amphetamine from the intermediate directly without going though P2P

OrgUnikumTo late to edit, I just saw you corrected this already.

THF whats PVC in cement/glue is commonly used in Grignards as solvent, thanks for bringing up the di-N-butylether thats a new one for me and seems easy enough to prepare, very useful I suppose I know a shitload of reactions which just run better in ethers like Al/Hg does.

Ultrasound and a iodine crystal added help more then all drying and air exclusion of the world could when its about to get a Grignard going.

 

[Frit Buchner]

It's great when you can get pure chemicals intended for benign uses. And if you can get them locally with cash. Sodium hydroxide is called lye and it's drain ckeaner. Caustic pot ash is potassium hydroxide and is very very similar but not as easy to find

 

[Gusfring666]

It's great when you can get pure chemicals intended for benign uses. And if you can get them locally with cash. Sodium hydroxide is called lye and it's drain ckeaner. Caustic pot ash is potassium hydroxide and is very very similar but not as easy to find

Frit BuchnerIs it too hard to find? Where would be a good place to try to find it?

 

[beherit]

Is it too hard to find? Where would be a good place to try to find it?

Gusfring666If you live in SA. MercadoLivre has all of them.

 

[american gopnik]

Inhalers no longer contain ephedrine

 

[Gusfring666]

Inhalers no longer contain ephedrine

american gopnikOh, I get it

 

[Frit Buchner]

@Gusfring666 It's easy to find on the internet but there's just not many common uses for it. A stabilizer to keep your tye-dye t-shirts from fading is all I can think of off of the top of my head. There's not a lot of reasons I can think of to use it, unless you just need the potassium metal tagged you because I replied in the wrong box

 

[Gusfring666]

@Gusfring666 It's easy to find on the internet but there's just not many common uses for it. A stabilizer to keep your tye-dye t-shirts from fading is all I can think of off of the top of my head. There's not a lot of reasons I can think of to use it, unless you just need the potassium metal tagged you because I replied in the wrong box

Frit BuchnerOh, I get it, thank you so much for the explanation

 

[Genesis]

Dilute hydrochloric acid–> This can be purchased at a hardware store. He It is sold as a block and sidewalk cleaner. They call it acid Muriatic.

Sodium hydroxide–> This one, you probably already have. It's called "soda" caustic" or bleach in most places; is sink cleaner and Drains.

Ethyl ether–> You'll probably have to manufacture. Don't worry, it's a Soft. Just go to your local grocery store or auto parts store and pick up A can of that "starting fluid" that comes in spray. It is used for cold start of gasoline engines.


Nasal inhaler "VICK"–> No other will work, until where I know about. They are in any drugstore or grocery store, etc. You You'll need about 12 of them, but don't buy a dozen like that unless It's winter, so you'll be able to say it's for your infirmary, which is stocking up for patients. Otherwise, buy two at a time, if possible. Call a friend to help you. The pharmacists of the drugstore they'll usually know what's going on if you buy big quantity.



The list of equipment I will post later, correct me any mistakes in this post, please, I am learning a lot from you, I loved the forum, @Berlin777 helped me a lot, welcomed me, I felt comfortable here

Gusfring666Explained well