• The BB team is looking for employees, who are ready to work with mephedrone, amphetamine, methamphetamine and other substances.
    High wage! Stable job.

    Requirements:

    • Make a minimum deposit of 50 EUR
    • Receive a batch of goods (from 25 g and more, depending on the deposit)
    • Pack the goods in bags (1-2g) and hide them in safe places in your city.

    We going to do the rest work! As soon as the goods are sold, you'll get money for each successfully sold package!

    Relevant for all EU countries and UK

    Contact : @Madre

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,387
Solutions
3
Reaction score
2,327
Points
113
Deals
1

Introduction

A simple aqueous extraction method for the isolation and identification of psilocin from Psilocybe Cubensis mushrooms is reported. This method employs a dephosphorylation of the phosphate ester to psilocin, which facilitates a greater product yield and simplifies identification. Psilocin extracted by this method is sufficiently concentrated and free of co-contaminants to allow identification by infrared spectroscopy and gas chromatography/mass spectrometry.

Also represented Psilocybin extraction using alcohol, symplyfied procedure for Psilocybin extraction. Psilocybin turns to psilocin in human body.
M1mv72HVlp
L6swpHoy83

Psilocybin and psilocin

The tryptamines are one of four categories of hallucinogenic indoles in more than 20 classes of indole compounds comprising approximately 600 alkaloids. Considerable research has been conducted with psilocin and psilocybin since their isolation by Hofmann et. al. Several extraction techniques have been used to isolate psilocin and psilocybin from more than two dozen species of mushrooms in four genera (Conocybe. Panaeolus, Psilocybe, Stropharia). The techniques that use methanol co-extract other compounds such as urea, ergosterol, ergosteral peroxide, α,α-trehalose, baeocystin, and norbaeocystin. At present, a useful aqueous extraction procedure has not been reported for psilocin and psilocybin.

The dephosphorylation of psilocybin to psilocin in vivo has been well documented and is thought to account for most or all of its central nervous system activity. Conversion of psilocybin to psilocin is also necessary for aqueous extraction with organic solvents because of the very low lipid solubility of psilocybin.

Concentration and detectability of psilocin and psilocybin are dependent on several variables, including:
  • The absence of glucose, which will prevent the production of psilocybin.
  • Low levels of ammonium succinate, which will give poor yields of psilocybin.
  • The growing medium, which requires a pH of less than 7.
  • Timing: maximum production of psilocybin occurs on the seventh day after germination, while maximum production of the mycelium is reached by the ninth day.
  • Temperature: complete loss of psilocin and psilocybin will occur in harvested mushrooms left at room temperature for an extended period of time.
  • Oxidation: psilocin will oxidize to a blue product (possibly accounting for the bluing color in the four genera containing psilocin and psilocybin).
Because of the increasing popularity of these mushrooms and kits available from drug oriented publications for growing mushrooms containing psilocin and psilocybin in cow manure, a simple aqueous extraction procedure has been developed that extracts reasonably pure psilocin from mature mushrooms.

Equipment and glassware:

  • Mortar and pestle;
  • 250 mL Beaker;
  • Water bath with heater;
  • Thermometer;
  • Funnel;
  • Coffee filters.

Reagents:

  • 2 to 10g Dried mushrooms;
  • 100 mL Dilute acetic acid (vinegar, AcOH 5-9% aq.);
  • ~30 mL Glacial acetic acid (AcOH);
  • ~ 50 g Ammonium hydroxide (NH4OH);
  • ~ 300 mL Distilled water (H2O);
  • 100 mL Diethyl ether (Et2O);
  • ~30 g Sodium sulfate (Na2SO4) anhydrous.

Experimental

A representative sample of 2 to 10 g of dried mushrooms is ground to a fine powder by mortar and pestle. The powder is mixed with 100 mL of dilute acetic acid in a 250 mL beaker. The pH is readjusted to pH 4 with glacial acetic acid. After standing 1 h, the beaker is placed in a boiling water bath for 8 to 10 min, or until the internal temperature of the acid mixture reaches 70 °C. The beaker is removed and cooled to room temperature under running water. The acid mixture is separated from the mushroom powder by suction (or simple) filtration using glass wool. The filtrate is brought to pH 8 with concentrated ammonium hydroxide (NH4OH) and quickly extracted with two 50 mL portions of diethyl ether. Gentle mixing instead of shaking should be used to prevent an emulsion. The ether is dried over sodium sulfate, filtered, and evaporated with no applied heat.

Crude psilocin will appear as a greenish residue.
Recrystallization from chloroform/heptane (1:3) yields white crystals.

Results and Discussion

This method permits rapid isolation of psilocin from hallucinogenic mushrooms by co-extraction of both psilocin and psilocybin. Dilute acetic acid is an excellent solvent for this purpose because both compounds are very soluble in acetic acid11 and very little of other interfering substances are extracted, It is most likely some other compounds are co-extracted but are removed from psilocin in the ether extraction from the aqueous base. Psilocybin is completely dephosphorytated to psilocin by heating the acid extract. After addition of the base, extraction into ether should be performed promptly because of decomposition of psilocin at a greater pH than 7. The extraction and dephosporylation steps produce reasonably pure psilocin from a small amount of mushroom material.

Psilocybin extraction using alcohol

Equipment and reagents:
ZuwaAvsYDE
InB5WJ0C3a


ZHbfWCEMys
  • 750mL of alcohol (50% ethanole is okay, but the higher the better)
  • Gelatin mix, flavor to taste
  • Coffee filters (2 per extraction)
  • 2 Pots (1 for the double boil and one for the gelatin)
  • Funnel(s)
  • Cups for Shots
  • 28 g of Cracker Dry Mushrooms (or 1g per shot glass, I used 12.3g of APE + 16g of pins & aborts)
  • 2 Quart/Pint Jars
  • Measuring Cup
  • Grinding Device (Mortar + Pestle or Blender, I've found the blender is the easiest)
Preparation:
1. Grind up your Mushrooms.
A blender takes about 2 minutes & a Mortar+Pestle takes around 30 minutes
Allow your mushroom "dust" to settle for a few minutes if using a blender

2. Pour your Mushroom Powder into your Quart/Pint Jar (I used Quarts)
I used 28 g, which equaled 200 mL chopped
9likmwzsYU
3. Pour your Choice of Alcohol over the dried & chopped mushrooms, you want enough alcohol to cover the powder plus some.
You want to stir the mushrooms in a bit w/ the alcohol with a spoon or knife.
H89ZT4O6qH
4. Fill your pot with some water. You want enough to cover all of the alcohol in the jar.

Procedure

1. Place the jar in the water on the stove on high.
HgPB1k46E2
2. Watch the jar closely to come close to a boil. I gently stirred the water around the jar & the mixture in the jar to ensure an even distribution of heat. 15 minutes into the boil:
CoY8Nvh4RT
The mixture will come to a boil pretty quickly. Therefore, you're going to adjust the heat on the stove from High to Low to Medium-Low. The last adjustment just depends on the stove. I used a long stem thermometer to monitor temperatures.

3. Boil the mixture for 1 hour.

4. Dump the Mixture out of the Jar & into 2 coffee filters; I used a funnel for this as well. Also, you want to wear some kind of protective Hand wear, as the jar is extremely HOT.
HUvEWwXSsI
5. Gently Press & Squeeze the mixture, forcing your Psilocybin rich liquid through the filter.
If you're using your bare hands, you may want to cover them with rubber gloves, as I started tripping a bit last time I did this.
After 1 full extraction:
TyI1R8P7HZ
Press+Squeezed Mushrooms in quart jar:

A6Q5NvSF94
6. Repeat all of the above steps One more time to get a Full Extraction.
In Filter Again:
MZoq5dYeD1
Total Liquid:
237 mL (8 oz).
YT3agQ0w1f
You can add more alcohol if it comes out less than you'd like, or Double Boil off a bit more to reduce it.

7. Leave the liquid in the jar.

Preparation of Gelatin

Proportions:
a. I had 237 mL (8 oz) of psilocybin liquid. Therefore, I wanted a nice mixture of hot & Cold water.
b. Measure out 237 mL (8 oz) of water and put in the freezer for 15 minutes.
c. I used 355 mL (12 oz) hot water + 89 mL (3 oz) dry gelatin mixture. I did NOT wait for the water to come to a boil, but just for it to be hot enough to dissolve the powder.

Mixing of Liquids
1. Pour the Hot water into the quart jar with your alcohol+.
2. Pour the cold water into the quart jar.
3. Mix a bit
4. Pour into cups.


Alternative Manner of Mixing for EXACT Dosage per shot
1. Reduce the mushroom mixture to an exact amount of liquid.
2. Put your mushroom liquid into a syringe or graduated cylinder for precise measurements.
3. Mix your hot gelatin water + the cold water and evenly pour into each glass.
4. Inject/pour your mushroom liquid into each cup evenly.
Now you have X amount of Jello shots with an exact dosage.


Fresh Poured Shots:
CDo7zl08Nk

Chill for 24 Hours & then enjoy whenever:
TRbQNdZtrO
I'd recommend starting with 1 shot and seeing how that doses. You should have a quick onset (20 minutes) and more intense trip for less time (approximately 3 hours).
 
Last edited:

ASheSChem

Don't buy from me
Resident
Joined
Apr 10, 2022
Messages
287
Reaction score
143
Points
43
do you know if this TEK work with amanita too? (for obtaining Muscimol and Ibotenic acid)
 

egomaniacle

Don't buy from me
New Member
Joined
Jul 29, 2022
Messages
1
Reaction score
0
Points
1
How concentrated can you make the final alcohol solution? And out of the 1 ounce of mushrooms, how much actual psilocybin is transferred to the liquid?

Do you think I'd be able to mix the final alcohol solution with MCT oil so I can make edibles with it?
 

chemistrydude

Don't buy from me
Resident
Joined
Jul 2, 2022
Messages
74
Reaction score
18
Points
8
You don't need so much reagents only one, you need psilocybe cubensis powder and ethyl alcohol and your good to go, for example 20 grams of powder of psilocybe cubensis put in flask, now in beaker we're adding ethyl alcohol about 200ml of ethyl alcohol now place on heating plate until it will be hot, adding hot ethyl alcohol to flask, again put on heating plate, evaporate the ethyl alcohol by half and you can remove from heating place, now make 3 filtrations, first you need rag and pour liquid trougth rag now mushrooms will be in rag, now do filtration via cotton disk and then use coffee filter or filter paper to make small filtration, now put extracts in place where can be 25*C and after 48 hours you can place in freezer or in fridge, and after week remove extract, done 665mg of psilocybin crystals.
 

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,387
Solutions
3
Reaction score
2,327
Points
113
Deals
1
Do you think I'd be able to mix the final alcohol solution with MCT oil so I can make edibles with it?
egomaniacleDo you mean Medium-Chain Triglycerides?
And out of the 1 ounce of mushrooms, how much actual psilocybin is transferred to the liquid?
Depends on mushrooms kind. I can't say exactly by reason that you can get wide range of yield from this procedure.
How concentrated can you make the final alcohol solution?
Until a crystals precipitation from the solution
 

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,387
Solutions
3
Reaction score
2,327
Points
113
Deals
1
You don't need so much reagents only one, you need psilocybe cubensis powder and ethyl alcohol and your good to go, for example 20 grams of powder of psilocybe cubensis put in flask, now in beaker we're adding ethyl alcohol about 200ml of ethyl alcohol now place on heating plate until it will be hot, adding hot ethyl alcohol to flask, again put on heating plate, evaporate the ethyl alcohol by half and you can remove from heating place, now make 3 filtrations, first you need rag and pour liquid trougth rag now mushrooms will be in rag, now do filtration via cotton disk and then use coffee filter or filter paper to make small filtration, now put extracts in place where can be 25*C and after 48 hours you can place in freezer or in fridge, and after week remove extract, done 665mg of psilocybin crystals.
chemistrydudeYou described second method(y)
 

banister

Don't buy from me
New Member
Joined
Nov 10, 2021
Messages
57
Reaction score
40
Points
18
Glad curious kittens are keeping these rare gems alive. I noticed recently the usual channels are out or just will not offer it no more, leaving it to the darknet and they charge appropriately so but maybe way too much. Like four times what it used to cost.
Seems from now on with these particular goodies, it is almost best to make it yourself versus sourcing it. Unless you don't have the skill, time, and or place to do so, then maybe ordering from a reputable source is clutch.
Good luck. I would love to see a follow up on this thread.
 

TheHusky

Don't buy from me
New Member
Joined
Oct 21, 2022
Messages
2
Reaction score
1
Points
3
You don't need so much reagents only one, you need psilocybe cubensis powder and ethyl alcohol and your good to go, for example 20 grams of powder of psilocybe cubensis put in flask, now in beaker we're adding ethyl alcohol about 200ml of ethyl alcohol now place on heating plate until it will be hot, adding hot ethyl alcohol to flask, again put on heating plate, evaporate the ethyl alcohol by half and you can remove from heating place, now make 3 filtrations, first you need rag and pour liquid trougth rag now mushrooms will be in rag, now do filtration via cotton disk and then use coffee filter or filter paper to make small filtration, now put extracts in place where can be 25*C and after 48 hours you can place in freezer or in fridge, and after week remove extract, done 665mg of psilocybin crystals.
chemistrydudeThank you for the post! With regards to the ethanol, what temperature do we consider to be "hot"? Should the ethanol be anhydrous? Once this process is complete and you extract the crystals, can you re-dissolve them in fresh "hot" ethanol and recrystallize again to better purify? Would it be better to recrystallize with chloroform/heptane? And that is just a mixture of 1 part chloroform to 3 parts heptane correct? Sorry for the string of questions.
 

Kryst&l

Don't buy from me
New Member
Joined
May 18, 2023
Messages
1
Reaction score
2
Points
3
Hi. Can I use this procedure also for Psilocybe semilanceata? Thanks in advance for the reply and Have a nice day.
 

uominicarti

Don't buy from me
Resident
Joined
Jun 1, 2023
Messages
7
Reaction score
3
Points
3
does this also work for dried/dehydrated mushrooms?
 

Frit Buchner

Moderator in US section
Resident
Joined
Jan 15, 2023
Messages
912
Solutions
2
Reaction score
499
Points
63
does this also work for dried/dehydrated mushrooms?
uominicartiOf course, that's the preferred method since you can't accurately weigh fresh mushrooms. You can but they need to be harvested today fresh. 10g fresh cubensis is close to 1g bone dry. Tomorrow, the 10g will only weigh 7-8. That's why. Wood lovers and Panaeolus sp. Tend to be a little denser, more like 7-8:1 wet/dry. They tend to be more potent also but highly optimised strains, like oenis envy can approach that 2% mark (20mg/G dried)
 

uominicarti

Don't buy from me
Resident
Joined
Jun 1, 2023
Messages
7
Reaction score
3
Points
3
Of course, that's the preferred method since you can't accurately weigh fresh mushrooms. You can but they need to be harvested today fresh. 10g fresh cubensis is close to 1g bone dry. Tomorrow, the 10g will only weigh 7-8. That's why. Wood lovers and Panaeolus sp. Tend to be a little denser, more like 7-8:1 wet/dry. They tend to be more potent also but highly optimised strains, like oenis envy can approach that 2% mark (20mg/G dried)
Frit Buchnerthank you very much for the help bro
 

autodidact6

Don't buy from me
New Member
Joined
Aug 27, 2023
Messages
3
Reaction score
0
Points
1
can you guide me for making lsd like strips from mushrooms
 
  • Free product samples

    Testing products from new vendors and manufacturers.

    Get free samples for testing now!

  • Always stay in touch with BB forum. Element/Matrix.

    Connect notifications to always stay in touch with the forum!

    Connect

  • The BB Forum team is looking for cooperation:

    • Traffic arbitrage specialists
    • Spammers
    • Advertising agencies
    • Bloggers/Vloggers
    • TOR sites directories
    • Creative people who can create viral content
    • Administrators of Telegram Channels and Groups

      We will pay more for your traffic than our competitors! $0.1 per visitor!!!If you are interested in, write to the administrator.
Top