Download Video
very good
What is the extent of its effect and the symptoms after smoking? Does it cause relaxation to the nervous system and a decrease in awareness and concentration?
Some dealers grind up the marijuana herb and add a small amount of ketamine, which gives a quick relaxation effect. Does this give the same effect?
 
very good
What is the extent of its effect and the symptoms after smoking? Does it cause relaxation to the nervous system and a decrease in awareness and concentration?
Some dealers grind up the marijuana herb and add a small amount of ketamine, which gives a quick relaxation effect. Does this give the same effect?
No. This cannabinoid has a very different effect, but it's very positive.
 
I have an better receipe with actual herb leaves all trash from the plants, little bees wax, IPA, (terpenes are a bit pricy but one coud buy) and the product ressembe marocan hash by taste, look, and is higher on effects, but nowadays there is so shity canabinoids no one deserves to smoke such shits, but with jwh-018 i woud even take a puff without worrying my health :))
 
It's very same effect like natural hash? Or if not then which noid giving same effect like natural hash so nobody can recognize the differen
 
The product gives strong relaxation and positive energy. If the dosage is high, then a stoned effect is obtained. Very similar to a natural product if you choose the right dosage.
 
The product gives strong relaxation and positive energy. If the dosage is high, then a stoned effect is obtained. Very similar to a natural product if you choose the right dosage.
Brother if I gonna use different noid? Like adb-pinaca? Better? And about hops it different if I gonna use hop extract powder or hop granulated?
 
Is it normal that the Hash changes its color to a "naturak" brown after while.

I would use at least some fake terpenes.

I can't imagine that this is smokable or taste like Hash at all...
I think customer will recognize this emediatly.

So does anybody have good recepie ?

Terpenes for around 30€ for the taste but this different ingredients would make a total different Taste and consistancy as well....

Does anybody wants to share his tricks?
 
I have an better receipe with actual herb leaves all trash from the plants, little bees wax, IPA, (terpenes are a bit pricy but one coud buy) and the product ressembe marocan hash by taste, look, and is higher on effects, but nowadays there is so shity canabinoids no one deserves to smoke such shits, but with jwh-018 i woud even take a puff without worrying my health :))
Pls share exact ingredients
 
Yes, adb noids is possible. Hops powder extract is better of course.
MDMB- BUTINACA I think is stronger than jwh so in your opinion how much will we add this noids to get perfect hash and very strong stuff so client can be satisfied and don't even recognize if it chemistry hash or natural hash
 
Pls share exact ingredients
for 100euro in BTC i will share you the best recipe 1:1 with the real deal(buble type or kief type), you will make lots of cash this way i think the 100 euro are simvolic in this manner :) And buy a hydrauic press with squre mold on it :)

Mr_pablito MDMB-Butinaca is stronger than plain butinaca but what else it still have its chemical taste, if you wanna sell somethink as real deal atlest do it 1:1 with the real deal (smell,ingredients, and then think what potency what you want to do it )
 
for 100euro in BTC i will share you the best recipe 1:1 with the real deal(buble type or kief type), you will make lots of cash this way i think the 100 euro are simvolic in this manner :) And buy a hydrauic press with squre mold on it :)

Mr_pablito MDMB-Butinaca is stronger than plain butinaca but what else it still have its chemical taste, if you wanna sell somethink as real deal atlest do it 1:1 with the real deal (smell,ingredients, and then think what potency what you want to do it )
What you mean brother to do 1:1 with the real deal
 
for 100euro in BTC i will share you the best recipe 1:1 with the real deal(buble type or kief type), you will make lots of cash this way i think the 100 euro are simvolic in this manner :) And buy a hydrauic press with squre mold on it :)

Mr_pablito MDMB-Butinaca is stronger than plain butinaca but what else it still have its chemical taste, if you wanna sell somethink as real deal atlest do it 1:1 with the real deal (smell,ingredients, and then think what potency what you want to do it )
What you mean brother to do 1:1 with the real deal
 
A better alternative could be to press cbd kief into hash with the JWH-018

you could buy 10lb worth of kief for 1500$
Or even less if you buy a larger quantity.
The hash will actually be proper hash and won’t completely annihilate the lungs of the consumer.
 
A better alternative could be to press cbd kief into hash with the JWH-018

you could buy 10lb worth of kief for 1500$
Or even less if you buy a larger quantity.
The hash will actually be proper hash and won’t completely annihilate the lungs of the consumer.
I think cbd kief or Hash would be most authentic but also pretty expensive. I think other ingredients will be noticed, even if the customer passes out after 2 hits 🤔 😁

For 1500€ I could also invest in cheap Hash from Spain...
 
what is the point of producing this mass similar to hash if you can buy cbd hash at a low price and simply add jwh to it
 
I think cbd kief or Hash would be most authentic but also pretty expensive. I think other ingredients will be noticed, even if the customer passes out after 2 hits 🤔 😁

For 1500€ I could also invest in cheap Hash from Spain...
yeah but definitley not 10lbs worth
 
yeah but definitley not 10lbs worth
True that, and I think I already bought some fake Hash which was eventually made like this and it was unsmokable and was sold for 3€/g. I would prefer at least something similar to Hash instead of this...
 
Another question, does anybody know how cbd Hashor kief is produced? Because there is no thc inside, what is it made from?
Another thing I've seen on a documentary about morocco Hash, that they produce a low quality at the end of the year, I don't know how or if it's then cut with henna but I think they somehow use more plant matter to get low quality Hash.

BTW there is also this fake drysift trick out there, which was pretty popular a year ago.
 
Another question, does anybody know how cbd Hashor kief is produced? Because there is no thc inside, what is it made from?
Another thing I've seen on a documentary about morocco Hash, that they produce a low quality at the end of the year, I don't know how or if it's then cut with henna but I think they somehow use more plant matter to get low quality Hash.

BTW there is also this fake drysift trick out there, which was pretty popular a year ago.
for large scale they probally use rotary screen sieve.
 
Hello brother, I don't know what is -018jwh and where should I get it, can you help me? Is it possible to make it?
 
Just saying, this likely smokes horribly and tastes foul when smoked, and can't be even remotely non-toxic.

Another person recommended using cbd kief, and besides some other waxy trichomes from another plant (idk if one exists, I assume so) cbd kief mixed with an analogue (say THCP, Google it) or something like that would be the best idea to make fake hash.
 
Using THCA and CBD dry hash would be the way to go... Mix it, heat it, and press it. A proper hash press could be used. It'd be the most expensive, but most authentic, and for many of us, legal, way of doing it. And lots be could be made by a single person.

But I've found no reliable source of THCA at a reasonable price... so there's my pipe dream (pardon the pun).

So... buy good quality CBD, convert it to (most likely) a mix of Delta 9 and Delta 8, and then mix that product with dry sift CBD hash. Heat. Press. It'd be a close 2nd to the real thing, and it would be cost-effective. It could also be an enjoyable evening smoke for those that partake, and a good product offering for the business minded.
 
this is basicly a good method to have quantity hash for selling but i realy dont recomand u to smoke it as glyceryn is oling ur lungs and can cause pneumonia hash is usually pollen of weed buds pressud up witch can contain up to 40 porcent of thc if its filtered ice cold way , might suit the european and american market but its not gonna be easy to sell if they have a thc test
 
this is basicly a good method to have quantity hash for selling but i realy dont recomand u to smoke it as glyceryn is oling ur lungs and can cause pneumonia hash is usually pollen of weed buds pressud up witch can contain up to 40 porcent of thc if its filtered ice cold way , might suit the european and american market but its not gonna be easy to sell if they have a thc test
While using glycerin for hash quantity is a method, smoking it isn't recommended. Glycerin can oil your lungs and potentially lead to pneumonia. Hash, made from pressed weed pollen, may contain up to 40% THC, but selling it might be challenging with THC tests in the European and American markets. Stay cautious!
 
how do you properly dose this? the dosage for JWH-018 is around 2mg, so because there is 10x more fake hash than there is JWH-018, would you need to weigh out 20mg of this hash?
 
I really want to know what other cost effective and easy to get by ingredients as base material could be used.. cbd kief, but what's its made of? There must be something more authentic.
 
how do you properly dose this? the dosage for JWH-018 is around 2mg, so because there is 10x more fake hash than there is JWH-018, would you need to weigh out 20mg of this hash?
You could dry doing a dry run. Scale down the recipe. See how many doses (by volume or weight) that it would get you. Consider the mg amount you want per does, do the math, and then scale it up. If you consider the weight of your dry run into the equation, you can mix the dry run back in so that no material is lost. Whatever you do, just start at a reasonable scale. It may take you a few runs to get the strength just right, but keep simple notes for yourself so that you don't repeat mistakes, forget things, or get anything mixed up (not obvious notes. Make it look like a beer recipe, perhaps. After all, you are buying hops). Remember, too, everybody... not all hops have the same aroma profile. Consider American hops.
 
You could dry doing a dry run. Scale down the recipe. See how many doses (by volume or weight) that it would get you. Consider the mg amount you want per does, do the math, and then scale it up. If you consider the weight of your dry run into the equation, you can mix the dry run back in so that no material is lost. Whatever you do, just start at a reasonable scale. It may take you a few runs to get the strength just right, but keep simple notes for yourself so that you don't repeat mistakes, forget things, or get anything mixed up (not obvious notes. Make it look like a beer recipe, perhaps. After all, you are buying hops). Remember, too, everybody... not all hops have the same aroma profile. Consider American hops.
I was thinking along the lines of how much hash is appropriate for a single dose (joint in this case) relative to how much jwh there is. do you by any chance know how much jwh is usually present per gram when buying spice for example?

I'm not too familiar with spice and haven't come across any spice in hash before so i have to ask.

and is it possible to get any hotspots when making this hash? Like in a similar way to incorrectly pressing pills?
 
I was thinking along the lines of how much hash is appropriate for a single dose (joint in this case) relative to how much jwh there is. do you by any chance know how much jwh is usually present per gram when buying spice for example?

I'm not too familiar with spice and haven't come across any spice in hash before so i have to ask.

and is it possible to get any hotspots when making this hash? Like in a similar way to incorrectly pressing pills?
Gotcha.

I've never tried JWs. I think the ideal dosage is simply going come down to being a matter of personal preference, like many things are ultimately, but this might offer some guidance:


Probably anything not mixed or laid properly can lead to "hot spots".

I cook and bake, and the general rule there is to mixe your dry ingredients, and then mix your wet ingredients, and add the dry to the wet in a few portions, mixing each thoroughly before adding the next portion of the dry ingredients mix. I'm speculating here, but I think that method would work here (Granted, I didn't reread the above recipe before writing this (being honest).

Given the consistency, I imagine that with the *appropriate gloves* you might even be able knead the end product like you would bread dough.

I forever feel like I could be doing something better with my time... so I would wonder if food processor with a "dough" setting and tool couldn't be incorporated, but I get the feeling I'm overthinking this.

Try the recipe on a super small scale and use the link I posted for dosing guidance. Report back, and then you can school us.
 
I really want to know what other cost effective and easy to get by ingredients as base material could be used.. cbd kief, but what's its made of? There must be something more authentic.
CBD kief is like Moroccan dry sift hash, but done with high CBD-low-THC cannabis. Being under 3% THC it's considered to be hemp product under the US Farm Bill, making it federally legal and accessible. It'd give you the same smell and flavor, look and texture as the high THC stuff. If you shop around, you'll find that you can locate more that a few good deals for it online. And in a variety of familiar strains.
 
These are very high quality and explanatory videos, but there is no decent video on the forum showing how we can make meth using red phosphorus and iodine. Can you please make a video about it?
 
Unfortunately it seems only that overpriced cbc kuef will do the job, otherwise it will be unsmokable
 
CBD kief is like Moroccan dry sift hash, but done with high CBD-low-THC cannabis. Being under 3% THC it's considered to be hemp product under the US Farm Bill, making it federally legal and accessible. It'd give you the same smell and flavor, look and texture as the high THC stuff. If you shop around, you'll find that you can locate more that a few good deals for it online. And in a variety of familiar strains.
But Hash are plant matter and trichomes, cbd don't have as much as I know.
 
But Hash are plant matter and trichomes, cbd don't have as much as I know.
That's pretty close to correct. There are different types of hash processing (dry, or ice water, or the really old way where the ladies would go out to the field and rub the plants with their hands, and then collect the hash from their hands), and also different grades.

With dry sift ("sift") the plants trichomes become harder when they dry. A rigid screen is placed over a very wide, shallow bowl, and the dried plant it repeatedly struck against the screen allowing the dried trichomes to break off. With ice water hash (aka bubble hash), the plant is place in a bag(s), placed into a container of ice water, and the bag containing the plant material is agitated. The trichomes become hard due to the ice water, and the agitation causes them to break loose and fall through the series of mesh bags, each being a tighter mesh than the last. After passing the finest mesh, you are left with a "full-melt" bubble hash. Their shouldn't be any leafy material or flower readily observable.
BTW... Check out "Auto Elephant". It an autoflowering pot plant that has as much CBD in it as it does THC. THC, CBD, THCA, CVG, XYZ, HDTV, ASAP. Man, those levels vary among plants. Dry sift CBD. Want it brown/black and stickyish? Heat it and press it. Easy-peasy.
 
Sh
Keep shopping around. There's some reasonably priced stuff out there if you look long enough. Remember-- you get what you pay for. Crap goes in, crap comes out. Just charge accordingly so that it's cost effective.
 
These are very high quality and explanatory videos, but there is no decent video on the forum showing how we can make meth using red phosphorus and iodine. Can you please make a video about it?
Ahh. The original biker meth. That's old school stuff. Red phosphorus and iodine to make Hydroiotic Acid (sp?). That's then used to reduce ephedrine, or pseudoephedrine, into d-methamphetamine. .... little tear in my eye and a sense of mastalgia....
 
Unfortunately it seems only that overpriced cbc kuef will do the job, otherwise it will be unsmokable

CBD Kief price example.

I made an error. I apologize. This will get you there, directly:

 
my only question is, what are those granulated chops. Im new and this is the first cannaboid that ill make
 
Why should anybody do shit like this... this has nothing to do with a good product.

My advice would be to get hands on some CBD which cost about 2 - 5 $ per g. Convert this to THC via isomerization to get about 60 - 90% pure mix of delta-8 & 9 THC which should be distilled.

works like a charm ;)

Then get some canabis plant material, grind it to death, add some terpenes and 50% of mass of the distilled THC. Then you will have a hitting product that won't harm anyone and afterall would be a real THC product.

Or get some CBD hash for some buggs. Mix it 50/50 with the synthesized THC and you will have some fine product too.

But please don't produce crap like this which just harms people to get their buggs...
 
That's pretty close to correct. There are different types of hash processing (dry, or ice water, or the really old way where the ladies would go out to the field and rub the plants with their hands, and then collect the hash from their hands), and also different grades.

With dry sift ("sift") the plants trichomes become harder when they dry. A rigid screen is placed over a very wide, shallow bowl, and the dried plant it repeatedly struck against the screen allowing the dried trichomes to break off. With ice water hash (aka bubble hash), the plant is place in a bag(s), placed into a container of ice water, and the bag containing the plant material is agitated. The trichomes become hard due to the ice water, and the agitation causes them to break loose and fall through the series of mesh bags, each being a tighter mesh than the last. After passing the finest mesh, you are left with a "full-melt" bubble hash. Their shouldn't be any leafy material or flower readily observable.
BTW... Check out "Auto Elephant". It an autoflowering pot plant that has as much CBD in it as it does THC. THC, CBD, THCA, CVG, XYZ, HDTV, ASAP. Man, those levels vary among plants. Dry sift CBD. Want it brown/black and stickyish? Heat it and press it. Easy-peasy.
Someone who knows how it goes ;)
for educational purpose maybe somebody would like to watch this movie:
 
oh yeah.. fair enough. i haven't seen anything in my quick google-ling that indicate smoking beeswax is particularly harmful either. in fact there's a cannabis company that puts beeswax in the tips of the joints it sells.
The primary concern with smoking beeswax is the potential for the smoke to release harmful toxins and pollutants. When beeswax is burned, it can release volatile organic compounds (VOCs), including acrolein, formaldehyde, and benzene. These chemicals can be harmful if inhaled in large quantities and may cause respiratory irritation, headaches, and nausea.
 
If u dont want to harm your customer and make him feel its good stuff, is to use cbd skuff/hash and even with those u have to get the perfect consisentcy and make it bubble otherwise customers wint pay much and wont be happy, escpecially with this beewax mix. You would recognice it instantly!!!
 

Media information

Category
Synthesis of Cannabinoids
Added by
Novator
Date added
View count
31,418
Comment count
66
Rating
3.00 star(s) 3 ratings
  • Free product samples

    Testing products from new vendors and manufacturers.

    Get free samples for testing now!

  • Always stay in touch with BB forum. Element/Matrix.

    Connect notifications to always stay in touch with the forum!

    Connect

  • The BB Forum team is looking for cooperation:

    • Traffic arbitrage specialists
    • Spammers
    • Advertising agencies
    • Bloggers/Vloggers
    • TOR sites directories
    • Creative people who can create viral content
    • Administrators of Telegram Channels and Groups

      We will pay more for your traffic than our competitors! $0.1 per visitor!!!If you are interested in, write to the administrator.
Top