• The BB team is looking for employees, who are ready to work with mephedrone, amphetamine, methamphetamine and other substances.
    High wage! Stable job.

    Requirements:

    • Make a minimum deposit of 50 EUR
    • Receive a batch of goods (from 25 g and more, depending on the deposit)
    • Pack the goods in bags (1-2g) and hide them in safe places in your city.

    We going to do the rest work! As soon as the goods are sold, you'll get money for each successfully sold package!

    Relevant for all EU countries and UK

    Contact : @Madre

Amphetamine synthesis via 1-phenyl-2-nitropropene LAH reduction

WillD

Expert
Joined
Jul 19, 2021
Messages
645
Reaction score
889
Points
93
Reagents:
  • Lithium aluminum hydride (LAH; cas 16853-85-3) 12 g;
  • 1,4-Dioxane 300 ml;
  • 1-Phenyl-2-nitropropene (P2NP; cas 705-60-2) 10 g;
  • Sodium hydroxide (25% NaOH) aq. solution;
  • Acetone ~50 ml;
  • Sulfuric acid ~10 ml;
Equipment and glassware:
Reaction scheme:
CpzcuoRi0F

Synthesis:
1. Lithium aluminum hydride (LAH) 12 g is weighted and put into a 1 L two-naked round bottom flask.
2. 1,4-Dioxane 200 ml is added into the flask.
3. The flask is places onto a magnetic stirrer and clamped on a retort stand, stirring bar is placed into the flask.
4.
1-Phenyl-2-nitropropene (P2NP) 10 g and 1,4-dioxane 100 ml are mixed in a 200 mL beaker. The mixture is stirred at room temperature until 1-Phenyl-2-nitropropene (P2NP) is dissolved.
5. A drip funnel is installed onto a reaction flask neck. The
P2NP solution from step 4 is poured into the drip funnel.
6. A drip funnel tap is opened and solution from step 4 is poured dropwise into the reaction mixture.
7. The reaction mixture is stirred at room temperature for 30 min after complete P2NP solution addition.
8.
Reflux condenser is installed onto the flask and the reaction mixture is refluxed for 1 h.
9. Then, the reaction flask is cooled in an ice water bath.
10. LAH is decomposed by the slow sodium hydroxide (25% NaOH aq. solution) addition.
11. The resulting white suspension is filtered from solids. Organic layer is separated with help of separatory funnel.
12. Organic layer is
evaporated under reduced pressure. Amphetamine free base yellow oil is obtained.
13. The amphetamine free base oil is dissolved in x3 acetone volume.
14. Sulfuric (or orthophosphoric) acid is added dropwise with a constant stirring to reach
pH 6.
15. The mixture is put into a freezer for 12 hours.
16. Next, the mixture is filtered on a Buchner flask and funnel. Amphetamine sulphate salt is air dried or dried in a
vacuum desiccator.
 
Last edited by a moderator:

Hans-Dietrich

Don't buy from me
New Member
Joined
Dec 4, 2021
Messages
47
Reaction score
40
Points
18
It is a bad idea to add dioxane to the LAH in the flask. Will not end well.
 

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,386
Solutions
3
Reaction score
2,327
Points
113
Deals
1
It is a bad idea to add dioxane to the LAH in the flask. Will not end well.
Hans-DietrichLithium aluminum hydride dissolves well in ether (35g/100ml) and hardly dissolves in dioxane (0.1g/100ml). If you have absolutely dry dioxane nothing will happen. It has violent reaction with water (trace will enough). I think dioxane was used here cuz it is easier to find than ether. You may try to substitute dioxate by THF, cuz it better solves LAH (13g/100ml).
 

Hans-Dietrich

Don't buy from me
New Member
Joined
Dec 4, 2021
Messages
47
Reaction score
40
Points
18
Lithium aluminum hydride dissolves well in ether (35g/100ml) and hardly dissolves in dioxane (0.1g/100ml). If you have absolutely dry dioxane nothing will happen. It has violent reaction with water (trace will enough). I think dioxane was used here cuz it is easier to find than ether. You may try to substitute dioxate by THF, cuz it better solves LAH (13g/100ml).
G.PattonThis should be very very dry dioxane in a very dry environment. It is necessary to add LAH to the dioxane and not vice versa. Otherwise, there will be a little boom ... It makes sense to use dried Et2O as Shulgin did, yes or THF.
 

ymaaah

Don't buy from me
Resident
Joined
Oct 27, 2022
Messages
156
Reaction score
49
Points
28
ether, you mean ethyl ether? ethyl ether is very dangerous, but acetate ether is better no? So if you use dioxane because ethyl ether is very inflammable and dangerous, acetate ether is a good way, or you use dioxane for another reason?
 

yuiopjkl

Don't buy from me
Resident
Joined
Mar 14, 2022
Messages
56
Reaction score
30
Points
18
I've seen a video about this synthesis before, but it was in Russian

If you are interested let me know and I will look for it
 

T 3

Don't buy from me
Resident
Joined
Jun 8, 2023
Messages
20
Reaction score
6
Points
3
Reagents:
  • Lithium aluminum hydride (LAH; cas 16853-85-3) 12 g;
  • 1,4-Dioxane 300 ml;
  • 1-Phenyl-2-nitropropene (P2NP; cas 705-60-2) 10 g;
  • Sodium hydroxide (25% NaOH) aq. solution;
  • Acetone ~50 ml;
  • Sulfuric acid ~10 ml;
Equipment and glassware:
Reaction scheme:

Synthesis:
1. Lithium aluminum hydride (LAH) 12 g is weighted and put into a 1 L two-naked round bottom flask.
2. 1,4-Dioxane 200 ml is added into the flask.
3. The flask is places onto a magnetic stirrer and clamped on a retort stand, stirring bar is placed into the flask.
4.
1-Phenyl-2-nitropropene (P2NP) 10 g and 1,4-dioxane 100 ml are mixed in a 200 mL beaker. The mixture is stirred at room temperature until 1-Phenyl-2-nitropropene (P2NP) is dissolved.
5. A drip funnel is installed onto a reaction flask neck. The
P2NP solution from step 4 is poured into the drip funnel.
6. A drip funnel tap is opened and solution from step 4 is poured dropwise into the reaction mixture.
7. The reaction mixture is stirred at room temperature for 30 min after complete P2NP solution addition.
8.
Reflux condenser is installed onto the flask and the reaction mixture is refluxed for 1 h.
9. Then, the reaction flask is cooled in an ice water bath.
10. LAH is decomposed by the slow sodium hydroxide (25% NaOH aq. solution) addition.
11. The resulting white suspension is filtered from solids. Organic layer is separated with help of separatory funnel.
12. Organic layer is
evaporated under reduced pressure. Amphetamine free base yellow oil is obtained.
13. The amphetamine free base oil is dissolved in x3 acetone volume.
14. Sulfuric (or orthophosphoric) acid is added dropwise with a constant stirring to reach
pH 6.
15. The mixture is put into a freezer for 12 hours.
16. Next, the mixture is filtered on a Buchner flask and funnel. Amphetamine sulphate salt is air dried or dried in a
vacuum desiccator.
William DampierWhat about using Red-Al and would u use same amounts as would LAH or..? Thx 🙏
 
  • Free product samples

    Testing products from new vendors and manufacturers.

    Get free samples for testing now!

  • Always stay in touch with BB forum. Element/Matrix.

    Connect notifications to always stay in touch with the forum!

    Connect

  • The BB Forum team is looking for cooperation:

    • Traffic arbitrage specialists
    • Spammers
    • Advertising agencies
    • Bloggers/Vloggers
    • TOR sites directories
    • Creative people who can create viral content
    • Administrators of Telegram Channels and Groups

      We will pay more for your traffic than our competitors! $0.1 per visitor!!!If you are interested in, write to the administrator.
Top